Abstract:The ultra-thin multilayer ceramics capacitors (MLCCs) with layer thickness less than 1 tm are in urgent demand due to the rapid development of modern electronic industries. However, the preparation of the dielectric materials with the desirable grain size <150 nm is a huge challenge. In this work, the ultra-fine BaTiO3 (BT) powders (<120 nm) prepared via solid-state reaction method, hydrothermal method and hydrothermal method following a heat treatment (850 degrees C) are selected to prepare the nano-crystalline non-reducible BT-based ceramics, respectively. The effect of the synthesis methods on the microstructure, electric performance and the reliability of the BT-based ceramics are studied. The results of the Raman, XPS and FT-IR spectroscopy demonstrate that a large number of internal stresses and point defects (hydroxyl/proton defects, Ba vacancies) are existed in the hydrothermal powders and can be eliminated to some extent by a proper heat treatment. Unfortunately, plenty of nano-pores (10-20 nm) are observed in the hydrothermal powders, which cannot be eliminated via the heat treatment or sintering process totally. As a result, the BT-based ceramic prepared by the solid-state powders has an absolute advantage in accelerating aging failure performance, compared to that prepared hydrothermal powders. The TSDC results indicate that the ceramic prepared by the solid-state powders has a lower oxygen vacancy concentration and a higher activation energy. Furthermore, a scaling analysis based on a RC equivalent model identifies the longer oxygen vacancy diffusion time for the ceramic prepared by the solid-state powders. All these features demonstrate that the solid-state ultra-fine BT powders are a promising candidate for the fabrication of the ultra-thin layer MLCCs. (C) 2020 Elsevier B.V. All rights reserved.

Preparation of Nano BaTiO3-Based Dielectric Ceramics by Different Sintering Methods

Preparation of Nano BaTiO3‐Based Ceramics for Multilayer Ceramic Capacitor Application by Chemical Coating Method

Microstructure Evolution and Dielectric Properties of Ultrafine Grained Batio3-Based Ceramics by Two-Step Sintering

Core-shell structure in nanocrystalline modified BaTiO3 dielectric ceramics prepared by different sintering methods

Effect of Ho‐Dy Co‐doping on the Electrical Properties and Reliability of BaTiO3‐based Nanoceramics for Base Metal Electrode Multilayer Ceramic Capacitor

Preparation of BaTiO 3 -Based Ceramics by Nanocomposite Doping Process

Significantly Enhanced Dielectric Properties of BaTiO3-based Ceramics Via Synergetic Grain Size and Defect Engineering

Fabrication of Batio3-Based Dielectrics for Ultrathin-Layer Multilayer Ceramic Capacitor Application by A Modified Coating Approach

Electrical And Reliability Characteristics Of Mn-Doped Nano Batio3-Based Ceramics For Ultrathin Multilayer Ceramic Capacitor Application

NANOCOMPOSITE DOPED BaTiO3-BASED ULTRAFINE DIELECTRICS FOR MULTILAYER CERAMIC CAPACITANCE

The effects of solid-state and hydrothermal synthesis methods of BaTiO3 on the reliability of multilayer ceramic capacitors

High Reliable Non-Reducible Ultra-Fine BaTiO3-based Ceramics Fabricated Via Solid-State Method

Dielectric Properties and Microstructures of Ta-doped BaTiO 3 –(bi 0.5 Na 0.5 )tio 3 Ceramics for X9R Applications

Effect of Rare Earth Oxide Content on Nanograined Base Metal Electrode Multilayer Ceramic Capacitor Powder Prepared by Aqueous Chemical Coating Method

Microstructures and Dielectric Characteristics of Ultrafine-Grained Barium Titanate-Based Ceramics for Base-Metal-Electrode Multilayer Ceramic Capacitors Applications

Synergistic Effect of Rare-Earth Elements on the Dielectric Properties and Reliability of BaTiO3-based Ceramics for Multilayer Ceramic Capacitors

The Grain Size Effect on Dielectric Properties of Batio3 Based Ceramics

Formation of Core‐Shell Structure in Ultrafine‐Grained BaTiO3‐Based Ceramics Through Nanodopant Method

Grain Size Engineered High‐performance Nanograined BaTiO3‐based Ceramics: Experimental and Numerical Prediction

A study of microstructure and properties of BaTiO3 from solid‐state and hydrothermal synthesis on MLCCs performance

Effect of Mg on the Dielectric and Electrical Properties of BaTiO 3 -Based Ceramics