Abstract:As consumer electronics and industrial control systems continue to evolve, the operating temperature range of capacitors is gradually increasing. Barium titanate-based ceramic capacitors are widely used in the field of high dielectrics, so temperature-stable barium titanate-based dielectric materials have been a hot research topic in the field of dielectric ceramics. The construction of a core–shell structure by unequal doping is an effective way to obtain temperature-stable dielectric materials. At the same time, this structure retains part of the highly dielectric tetragonal phase, and materials with overall high dielectric constants can be obtained. In this work, we prepared BaTiO3-xNaNbO3-0.002Gd2O3 (x = 1.0–6.0 mol%) as well as BaTiO3-0.05NaNbO3-yGd2O3 (y = 0–0.30 mol%) dielectric ceramics. On the basis of high-electronic-bandgap NaNbO3-modified BaTiO3 dielectric ceramics, a core–shell structure with a larger proportion of core phase was obtained by further doping the amphiphilic rare-earth oxide Gd2O3. By designing this core–shell structure, the temperature stability range of capacitors can be expanded. At a doping level of 5.0 mol% NaNbO3 and 0.20 mol% Gd2O3, the room temperature dielectric constant εr = 4266 and dielectric loss tan δ = 0.95% conforms to the X8R standard (from −55 °C to 150 °C, TCC < ±15%); volume resistivity ρv = 10,200 GΩ·cm and breakdown strength Eb = 13.5 kV/mm is attained in BaTiO3-based ceramics. The system has excellent dielectric and insulating properties; it provides a new solution for temperature-stable dielectric ceramics.

Core-shell structure in nanocrystalline modified BaTiO3 dielectric ceramics prepared by different sintering methods

Formation of Core‐Shell Structure in Ultrafine‐Grained BaTiO3‐Based Ceramics Through Nanodopant Method

Preparation of Nano BaTiO3-Based Dielectric Ceramics by Different Sintering Methods

Influence of Sintering Temperature on Core–shell Structure Evolution and Reliability in Dy Modified BaTiO3 Dielectric Ceramics

Microstructure Evolution and Dielectric Properties of Ultrafine Grained Batio3-Based Ceramics by Two-Step Sintering

Sintering Behavior and Reliability Characteristics of Batio3-Based Ceramics Prepared by Different Methods

Improved Energy Storage Performance of Ba0.4Sr0.6TiO3 Nanocrystalline Ceramics Prepared by Using Oxalate Co-Precipitation and Spark Plasma Sintering

Superior Reliability Via Two‐Step Sintering: Barium Titanate Ceramics

Effect of Milling Process on the Core-Shell Structures and Dielectric Properties of Fine-Grained BaTiO3-based X7R Ceramic Materials

A comparative study of microstructure and electrical properties of (Al, Nb) co-doped TiO2 ceramics by different sintering methods

Dielectric Properties of BaTiO3 Based Ceramics Prepared from Nano-powders

Optimization of microstructure and dielectric properties of BCTZ-based ceramics using two-step sintering method

Effects of Sintering Temperature on the Dielectric Properties of Batio3 Based X7r Ceramics

Significantly Enhanced Dielectric Properties of BaTiO3-based Ceramics Via Synergetic Grain Size and Defect Engineering

Core-shell structure strategy and oxygen vacancy engineering of 0.1LaMnO3@0.9(Ba0.5Sr0.5)TiO3 ceramics towards tuning electrical properties

Microstructure and dielectric properties of 0.99(0.94Bi0.47Na0.47Ba0.06TiO3-0.06BiAlO3)-0.01NaNbO3 lead-free ceramics via different methods

Properties and Microstructure of Ultrafine-Crystalline BaTiO3-based Energy Storage Ceramics

Effects of Grain Size and Temperature on the Energy Storage and Dielectric Tunability of Non-Reducible BaTiO3-based Ceramics

Wide Temperature Stability of BaTiO3-NaNbO3-Gd2O3 Dielectric Ceramics with Grain Core–Shell Structure

Modeling of the Core-Shell Microstructure of Temperature-Stable Batio3 Based Dielectrics for Multilayer Ceramic Capacitors

Preparation of Nano BaTiO3‐Based Ceramics for Multilayer Ceramic Capacitor Application by Chemical Coating Method