Abstract:The ultra-thin multilayer ceramics capacitors (MLCCs) with layer thickness less than 1 tm are in urgent demand due to the rapid development of modern electronic industries. However, the preparation of the dielectric materials with the desirable grain size <150 nm is a huge challenge. In this work, the ultra-fine BaTiO3 (BT) powders (<120 nm) prepared via solid-state reaction method, hydrothermal method and hydrothermal method following a heat treatment (850 degrees C) are selected to prepare the nano-crystalline non-reducible BT-based ceramics, respectively. The effect of the synthesis methods on the microstructure, electric performance and the reliability of the BT-based ceramics are studied. The results of the Raman, XPS and FT-IR spectroscopy demonstrate that a large number of internal stresses and point defects (hydroxyl/proton defects, Ba vacancies) are existed in the hydrothermal powders and can be eliminated to some extent by a proper heat treatment. Unfortunately, plenty of nano-pores (10-20 nm) are observed in the hydrothermal powders, which cannot be eliminated via the heat treatment or sintering process totally. As a result, the BT-based ceramic prepared by the solid-state powders has an absolute advantage in accelerating aging failure performance, compared to that prepared hydrothermal powders. The TSDC results indicate that the ceramic prepared by the solid-state powders has a lower oxygen vacancy concentration and a higher activation energy. Furthermore, a scaling analysis based on a RC equivalent model identifies the longer oxygen vacancy diffusion time for the ceramic prepared by the solid-state powders. All these features demonstrate that the solid-state ultra-fine BT powders are a promising candidate for the fabrication of the ultra-thin layer MLCCs. (C) 2020 Elsevier B.V. All rights reserved.

Grain size engineered high‐performance nanograined BaTiO 3 ‐based ceramics: Experimental and numerical prediction

Grain Size Engineered High‐performance Nanograined BaTiO3‐based Ceramics: Experimental and Numerical Prediction

Effect of Grain Size on Dielectric Properties and Reliability for Ultra-Thin MLCCs

The Grain Size Effect on Dielectric Properties of Batio3 Based Ceramics

Grain Size Effect on Electrical and Reliability Characteristics of Modified Fine-Grained BaTiO3 Ceramics for MLCCs

Significantly Enhanced Dielectric Properties of BaTiO3-based Ceramics Via Synergetic Grain Size and Defect Engineering

High-dielectric-constant Nanograin BaTiO3-based Ceramics for Ultra-Thin Layer Multilayer Ceramic Capacitors Via Grain Grading Engineering

Preparation of Nano BaTiO3‐Based Ceramics for Multilayer Ceramic Capacitor Application by Chemical Coating Method

Enhanced electrical reliability of Zr‐doped BaTiO3 nanoceramics: First‐principle calculations and experimental studies

Electrical And Reliability Characteristics Of Mn-Doped Nano Batio3-Based Ceramics For Ultrathin Multilayer Ceramic Capacitor Application

Microstructures and Dielectric Characteristics of Ultrafine-Grained Barium Titanate-Based Ceramics for Base-Metal-Electrode Multilayer Ceramic Capacitors Applications

Enhanced energy storage performance in NBT-based MLCCs via cooperative optimization of polarization and grain alignment

High Reliable Non-Reducible Ultra-Fine BaTiO3-based Ceramics Fabricated Via Solid-State Method

Simultaneous Enhancement of Dielectric Properties and Temperature Stability in BaTiO3‐based Ceramics Enabling X8R Multilayer Ceramic Capacitor

Dielectric Properties of Barium Titanate Based X7R Ceramics with Different Grain Sizes Mixed

Preparation of Nano BaTiO3-Based Dielectric Ceramics by Different Sintering Methods

Boosting Effective Capacitance of Nano-Grained Batio3-Based Ceramics Via a Precise Core-Shell Structure Optimization Strategy

Effects of Grain Size and Temperature on the Energy Storage and Dielectric Tunability of Non-Reducible BaTiO3-based Ceramics

Ultra-high energy storage performance in lead-free multilayer ceramic capacitors <i>via</i> a multiscale optimization strategy

Effects of Processing on Microstructure and Dielectric Properties of Ultrafine- Grained Barium Titanate Based Ceramics for BME-MLCC Applications

High-performance energy-storage ferroelectric multilayer ceramic capacitor via nano-micro engineering