Abstract:The miniaturization of electronic devices brings severe challenges in the deposition of metal interconnects in back end of line processing due to a continually decreasing volume available for metal deposition in the interconnect via. Cu is currently used as the interconnect metal and requires barrier and liner layers to prevent diffusion into silicon and promote deposition of smooth conducting metal films, respectively. However, these take up a significant volume in the interconnect vias, which are already extremely narrow due to the high aspect ratio required. Designing combined barrier/liner materials provides opportunities to promote deposition of smooth films and avoid islanding and frees up precious volume to deposit the required amount of interconnect metal. We present here the first atomistic kinetic Monte Carlo (kMC) investigation of the potential of Ru-modified TaN as a dual-function barrier/line material to promote 2D morphology of deposited Cu enabling optimization of the limited available interconnect volume. The kMC simulations use Density Functional Theory (DFT) activation barriers to predict the role of the combined barrier/liner material on the morphology of deposited Cu and give, for the first time, a tool to predict metal deposition on technologically important substrates. We study Cu deposition at different partial pressures on a series of substrates, including unmodified TaN and TaN with 25% or 50% surface Ru incorporation, at deposition temperatures of 300 K, 500 K and 800 K. The deposition simulations predict Cu film roughness, island size and number, substrate exposure area (as a measure of 2D vs. 3D morphology), layer occupation rate, compactness (as a measure of film quality) and the impact of annealing. As-deposited Cu on unmodified TaN exhibits significantly higher roughness and substrate exposure areas, demonstrating island formation...

Ultrathin Ru–Ta–C Barriers for Cu Metallization

Low-Resistivity Ru-Ta-C Barriers for Cu Interconnects

Failure Mechanism of 5 Nm Thick Ta–Si–C Barrier Layers Against Cu Penetration at 750–800°C

Ruthenium Barrier/Seed Layer for Cu/Low-κ Metallization

Improved Barrier Properties of Ultrathin Ru Film with Tan Interlayer for Copper Metallization

Thermal Stability of Ultrathin RuC Film As Cu Diffusion Barrier

Comparison of Ru/Ta and Ru/TaN as Barrier Stack for Copper Metallization

5 - Nm -Thick TaSiC Amorphous Films Stable Up to 750°C As a Diffusion Barrier for Copper Metallization

Control of Cu morphology on TaN barrier and combined Ru-TaN barrier/liner substrates for nanoscale interconnects from atomistic kinetic Monte Carlo simulations

Recent Advances in Barrier Layer of Cu Interconnects

Sputtered Ru–Ti, Ru–N and Ru–Ti–N Films As Cu Diffusion Barrier

Ultra-Thin Ru/TaN Bi-Layer as Diffusion Barrier to Seedless Copper Interconnect

Study of the sputtered Mo/TaN and Mo-Ta thin film as diffusion barrier for copper metallization

Improvement of Diffusion Barrier Performance of Ru Thin Film by Incorporating a WHfN Underlayer for Cu Metallization

Cu Contact on NiSi/Si with Thin Ru/TaN Barrier

Influence of Tantalum/tantalum Nitride Barriers and Caps on the High-Temperature Properties of Copper Metallization for Wide-Band Gap Applications

Chemical Mechanical Polishing of Inlaid Copper Structures with Ru/Ta/TaN As Barrier/Liner Layer

The Inhibition of Enhanced Cu Oxidation on Ruthenium∕Diffusion Barrier Layers for Cu Interconnects by Carbon Alloying into Ru

Characteristics of Plasma-Treated Amorphous Ta-Si-C Film As a Diffusion Barrier for Copper Metallization

Tungsten Carbides As a Diffusion Barrier for Cu Metallization

Direct, Sequential Growth of Copper Film on TaN/Ta Barrier Substrates by Alternation of Pb-UPD and Cu-SLRR