Abstract:This study presents the design, fabrication and testing of the capacitive-type MEMS microphone with differential sensing electrodes to improve the sensitivity and signal-to-noise ratio (SNR). The microphone is designed and implemented based on an existing trench-refilled MOSBE process platform with two polysilicon structure layers, one Si3N4 electrical isolation layer and two sacrificial SiO2 layers. The microphone consists of top and bottom diaphragms and backplates. The top diaphragm and bottom backplate form a sensing electrode pair, and the bottom diaphragm and top backplate form the second sensing electrode pair. Moreover, the Si3N4 layer is exploited to partition the structures into three different electrical regions. Thus, the differential sensing MEMS microphone is achieved by using only two polysilicon structure layers. Various auxiliary components such as the central post and the U-shaped springs are also developed to realize the differential microphone. Measurements show that the typical fabricated microphone with a footprint of 800 μm diameter has the single-ended sensitivities of −45.8 and −47.2 dB (ref: 1 V/1 Pa), and the SNR is over 52 dB. Moreover, the ±3 dB bandwidth of the microphone ranges from 50 Hz–22 kHz. In summary, the presented microphone has the differential sensitivity of −40.5 dB (ref: 1 V/1 Pa) and the SNR of over 57.8 dB.

Development Of A No-Back-Plate Soi Mems Condenser Microphone

DESIGN AND IMPLEMENTATION OF A CMOS-MEMS MICROPHONE WITHOUT THE BACK-PLATE

SENSITIVITY IMPROVEMENT OF NO-BACK-PLATE MEMS MICROPHONE USING POLYSILICON TRENCH-REFILLED PROCESS

Novel in-plane gap closing CMOS-MEMS microphone with no back-plate

Implementation of the CMOS MEMS Condenser Microphone with Corrugated Metal Diaphragm and Silicon Back-Plate

Design and implementation of a novel CMOS MEMS condenser microphone with corrugated diaphragm

Design And Fabrication of Condenser Microphone Using Wafer Transfer And Micro-electroplating Technique

On the Single-Chip Condenser Miniature Microphone Using DRIE and Backside Etching Techniques

Single-chip Condenser Miniature Microphone with a High Sensitive Circular Corrugated Diaphragm

Study of a highly sensitive miniature condenser microphone based on MEMS technology

High Sensitivity and High S/N Microphone Achieved by PZT Film with Central-Circle Electrode Design

Theoretical and Experimental Studies of Single-Chip-Processed Miniature Silicon Condenser Microphone with Corrugated Diaphragm

Design and Implementation of Differential MEMS Microphones Using the Two Polysilicon Processes for SNR Enhancement

Bandwidth and SNR Enhancement of MEMS Microphones Using Two Poly-Si Micromachining Processes

Development Of A Cmos Compatible Process For Silicon Miniature Microphone With A High Sensitivity

Design and implementation of a novel double-poly microphone with rigid acoustic receiver, flexible spring supporter, and harm backplate

Implementation of piezoelectric mems microphone for sensitivity and sensing range enhancement

Design and Implementation of A Capacitive-Type Microphone with Rigid Diaphragm and Flexible Spring Using the Two Poly Silicon Micromachining Processes

Fabrication of a novel structural miniature silicon condenser microphone

Implementation of Two-Poly Differential MEMS Microphones for SNR and Sensing Range Enhancement

A New Measurement Microphone Based on Mems Technology