Abstract:The orientation modulation of ferroelectric materials is a suitable method to optimize material performance. Textured Bi(1-)(x)Sm(x)FeO(3)thin films (near the rhombohedral-orthorhombic (R-O) phase boundary, that is,x = 0, 0.1, 0.12, 0.14, and 0.16) were fabricated using the sol-gel process by introducing a LaNiO3(LNO) seed layer. Structural and ferroelectric characterizations were used to investigate the effect of texturing on the Sm doping-induced R-O phase transition of the BiFeO(3)thin films. It was found that a phase transition occurred from the rhombohedral to the orthorhombic structure with increasing Sm content in the nontextured polycrystalline films, resulting in an R-O phase boundary atx = 0.12. In contrast, the R-O phase boundary in the textured films was more diffuse, indicating a two-phase coexistence in a boarder range of Sm doping levels (x = 0.12-0.16). This discrepancy was attributed to the complexity of the stress status in thin films. The dielectric and electrical properties of the nontextured and textured samples were investigated. The current study shows that the phase boundary in ferroelectric thin films can be altered by diverse means, thus providing insights into potential applications.

Sol–gel-processed (001)-textured BiFeO3 thin films on Pt(111)/Ti/SiO2/Si substrates with PbO seeding nanocrystals

Sol-Gel Process and Properties of Textured Pb(Zr, Ti)O-3 Films on Silicon Wafers

Preparation and Characterization of Sol–gel Derived (100)-Textured Pb(Zr,Ti)O3 Thin Films: PbO Seeding Role in the Formation of Preferential Orientation

Multiferroic BiFeO3 Thin Films Prepared Via a Simple Sol-Gel Method

Growth of Textured CoFe 2 O 4 Thin Films on Platinized Silicon Prepared by a Sol-Gel Method

Sol‐Gel Routes to Nanostructured Patterned Ferroelectric Thin Films with Novel Electronic and Optical Functions

Structure and Characteristics of the BiFeO3 Fabricated by the Sol-Gel Technique

Texture control of sol-gel derived Pb(Mg1/3Nb2/3 O3-PbTiO3 thin films using seeding layer

Effect of PbO seeding layers on the structure and properties of the sol-gel-derived BiScO3-PbTiO3 thin films

Properties of (001)-textured Pb(Mg 1/3 Nb 2/3 )O 3 –PbTiO 3 thin films

Phase Transition and Piezoelectricity of Sol–gel-Processed Sm-doped BiFeO3 Thin Films on Pt(111)/Ti/SiO2/Si Substrates

Structure and Electrical Properties of (100)-Oriented BiSc1/2Fe1/2O3–PbTiO3 Thin Films with Different Thickness Via Sol–gel Method

Properties of (001)-textured Pb(Mg<sub>1/3</sub>Nb<sub>2/3</sub>)O<sub>3</sub>–PbTiO<sub>3</sub> thin films

Impact of texturing on the phase transitions in sol-gel-processed Bi(Sm)FeO(3)thin films on LaNiO3-buffered silicon

Texture Control of Sol-Gel Derived Pb(Mg<sub>1/3</sub>Nb<sub>2/3</sub>)O<sub>3</sub>-PbTiO<sub>3</sub>Thin Films Using Seeding Layer

Electric Properties of BiFeO3 Films Deposited on LaNiO3 by Sol-Gel Process

Fabrication and Properties of Sol–Gel‐Derived BiScO3–PbTiO3 Thin Films

Microstructure And Ferroelectric Properties Of Sol-Gel Derived Bi3.15nd0.85ti3o12 Thin Films On Pt/Ti/Sio2/Si(100)

Highly (100)-Textured Pb(Zr0.52Ti0.48)O3 Film Derived from a Modified Sol–gel Technique Using Inorganic Zirconium Precursor

Preparation of Bi3.15Nd0.85Ti3O12 ferroelectric thin films by sol-gel method

Formation of thin films by sol-gel processing