Abstract:Graphene Hall elements (GHEs) have been demonstrated to be promising magnetic field sensors with excellent sensitivity, linearity, temperature stability, and compatibility with complementary-metal-oxide-semiconductor (CMOS)-integrated circuits (ICs). However, the demonstrated GHEs have still not exhibited a comprehensive advantage in performance over commercial integrated Hall sensors which were implemented in integrated Hall element and CMOS processing ICs. In this work, we develop a technology for the three-dimensional (3D) heterogeneous integration of silicon-based CMOS ICs and GHEs, and the fabricated magnetic field sensors outperform commercial high-end integrated Hall sensors. Specifically, the integrated Hall sensors are implemented in a stacked integration on Si based on a chopper programmable-gain amplifier (CPGA), a chopper-stabilized second-order sigma-delta modulator (CSDM), and graphene-based Hall elements on monochips. GHEs with high sensitivity (up to 1000 A/VT) are fabricated with a compatible process on a smoothened silicon nitride passivation layer of silicon-based CMOS ICs, and the two device layers are connected by an interlayer. The heterogeneous integrated Hall ICs exhibit current and voltage magnetic sensitivities up to 64 000 A/VT and 6.12 V/VT, respectively, which are much higher than those in all other reported nanomaterial-based Hall sensors and even in high-end commercial Hall ICs. Furthermore, the 3D heterogeneous integration technology used here can be extended as a universal technology for integrating nanomaterial-based sensors and Si CMOS ICs.

GaN on Patterned Silicon (GPS) Technique for GaN-based Integrated Microsensors

Gan on Patterned Silicon (gps) Technique for Fabrication of Gan-Based Mems

SiN-masked GaN-on-patterned-silicon (GPS) Technique for Fabrication of Suspended GaN Microstructures

Fabrication of Large-Area Suspended MEMS Structures Using GaN-on-Si Platform

AlGaN/GaN Heterostructures for Non-Invasive Cell Electrophysiological Measurements.

Design and Testing on High Sensitive Micro-accelerometer Based on HEMT

The Research on the Gas Sensor Based on LAPS and Nanometer Porous Silicon

Fabrication of GaN-based MEMS Structures Using Dry-Etch Technique

Measurement of Piezoresistance Coefficient Based on GaN HEMT Micro-Accelerometers

Characterization of AlGaN/GaN cantilevers fabricated with deep-release techniques

Residual stress characterization of GaN microstructures using bent-beam strain sensors

Measurement of piezoresistance coefficient with different gate voltages of GaN HEMT micro-accelerometer

Characterization of Gan Cantilevers Fabricated with Gan-On-Silicon Platform

AlGaN/GaN Pressure Sensor with a Wheatstone Bridge Structure

Fabrication of suspending gan microstructures with combinations of anisotropic and isotropic dry etching techniques

A Reliable Strain Sensor Based on Bridging GaN Nanowires

Piezotronic effect in AlGaN/AlN/GaN heterojunction nanowires used as a flexible strain sensor

Applications of AlGaN/GaN High Electron Mobility Transistor-Based Sensors in Water Quality Monitoring

Review of the AlGaN/GaN High-Electron-Mobility Transistor-Based Biosensors: Structure, Mechanisms, and Applications

Ultrasensitive Magnetic Sensors Enabled by Heterogeneous Integration of Graphene Hall Elements and Silicon Processing Circuits.

GaN HEMTs on Low Resistivity Si Substrates with Thick Buffer Layers for RF Signal Amplification and Power Conversion