Abstract:High static power associated with static random access memory (SRAM) represents a bottleneck in increasing the amount of on-chip memory. Novel, emerging nonvolatile memories such as spintransfer torque magnetic random access memory (STT-RAM), resistive random access memory (RRAM), and ferroelectric field effect transistor-based random access memory (FeFET-RAM) are alternatives for replacing hardware kernels such as SRAM-based last level caches (LLC) due to their fast access times and lower leakage. In this paper, we study an ultra-dense FeFET-RAM based on 1-FeFET memory cells, and address potential disturbance issues at the array level. Disturbances are studied experimentally and via simulation. Experimental measurements are well correlated with modeling results suggesting that we have a good understanding of how disturbance issues will manifest themselves. That said, previous WRITE schemes for 1-FeFET arrays may: 1) exacerbate disturbances and 2) significantly degrade figures of merit (FoM) such as WRITE power. To address these issues, we propose the use of columnwise body connections to simultaneously overcome disturbances and reduce leakage currents during WRITES. We present detailed studies on how 1-FeFET memory cells and arrays (with columnwise body bias) fare when compared to traditional SRAM approaches and other emerging technologies. Notably, we benchmark the 1-FeFET memory against 1T + 1FeFET and 2T + 1FeFET designs proposed in early works, as well as SRAM, STTRAM, and RRAM. Our evaluation of a 64×64 FeFET-RAM array shows that the area, READ delay, and static power are reduced by ~5.3×, ~1.5×, and ~74×, respectively, when compared to an SRAM equivalent. Also, the 1-FeFET memory cell design shows ~50× improvements in terms of WRITE energy with respect to STTRAM and RRAM counterparts.

A FRAM technology using 1T1C and triple metal layers for high performance and high density FRAMs

A Scalable Design of Multi-Bit Ferroelectric Content Addressable Memory for Data-Centric Computing

A Novel 3D 2TnC FeRAM Architecture and Operation Scheme with Improved Disturbance for High-Bit-Density Dynamic Random-Access Memory

The Performance of FRAM Integrated With 3D Trench Hf<inf>0.5</inf>Zr<inf>0.5</inf>O<inf>2</inf> Ferroelectric Capacitor

Research on Circuit Design Techniques for 1 kbit Ferroelectric Random Access Memory

1T1C FeRAM Memory Array Based on Ferroelectric HZO With Capacitor Under Bitline

CMOS-compatible ferroelectric NAND flash memory for high-density, low-power, and high-speed three-dimensional memory

Novel Multilevel Non-Destructive-Read-Out (ndro) Ferroelectric Floating-Gate Random Access Memory (Ffram)

FeRAM using Anti-ferroelectric Capacitors for High-speed and High-density Embedded Memory

First demonstration of 2T0C-FeDRAM: a-ITZO FET and double gate a-ITZO/a-IGZO FeFET with a record-long multibit retention time of >4-bit and >2000 s

Design and Simulation Analysis of a 3TnC MLC FeRAM Using a Nondestructive Readout and Offset-Canceled Sense Amplifier for High-Density Storage Applications

High-speed and low-power FRAM with a bitline-segmental array

Polycrystalline-Silicon-MOSFET-Based Capacitorless DRAM With Grain Boundaries and Its Performances

Design and Analysis of an Ultra-Dense, Low-Leakage, and Fast FeFET-Based Random Access Memory Array

Organic Ferroelectric-Based 1T1T Random Access Memory Cell Employing a Common Dielectric Layer Overcoming the Half-Selection Problem

Low Operation Voltage, High-Temperature Reliable, and High-Yield BEOL Integrated Hf$_{\text{0}.\text{5}}$Zr$_{\text{0}.\text{5}}$O$_{\text{2}}$ Ferroelectric Memory Arrays

Low Operation Voltage, High-Temperature Reliable, and High-Yield BEOL Integrated Hf0.5Zr0.5O2 Ferroelectric Memory Arrays

Bulk fin-type field-effect transistor-based capacitorless dynamic random-access memory with strong resistance to geometrical variations

Highly Functional and Reliable 8mb Stt-Mram Embedded in 28nm Logic

A New High-Reliable 2t/1c Feram Cell

High-performance ferroelectric memory based on fully patterned tunnel junctions