Abstract:High static power associated with static random access memory (SRAM) represents a bottleneck in increasing the amount of on-chip memory. Novel, emerging nonvolatile memories such as spintransfer torque magnetic random access memory (STT-RAM), resistive random access memory (RRAM), and ferroelectric field effect transistor-based random access memory (FeFET-RAM) are alternatives for replacing hardware kernels such as SRAM-based last level caches (LLC) due to their fast access times and lower leakage. In this paper, we study an ultra-dense FeFET-RAM based on 1-FeFET memory cells, and address potential disturbance issues at the array level. Disturbances are studied experimentally and via simulation. Experimental measurements are well correlated with modeling results suggesting that we have a good understanding of how disturbance issues will manifest themselves. That said, previous WRITE schemes for 1-FeFET arrays may: 1) exacerbate disturbances and 2) significantly degrade figures of merit (FoM) such as WRITE power. To address these issues, we propose the use of columnwise body connections to simultaneously overcome disturbances and reduce leakage currents during WRITES. We present detailed studies on how 1-FeFET memory cells and arrays (with columnwise body bias) fare when compared to traditional SRAM approaches and other emerging technologies. Notably, we benchmark the 1-FeFET memory against 1T + 1FeFET and 2T + 1FeFET designs proposed in early works, as well as SRAM, STTRAM, and RRAM. Our evaluation of a 64×64 FeFET-RAM array shows that the area, READ delay, and static power are reduced by ~5.3×, ~1.5×, and ~74×, respectively, when compared to an SRAM equivalent. Also, the 1-FeFET memory cell design shows ~50× improvements in terms of WRITE energy with respect to STTRAM and RRAM counterparts.

Bulk fin-type field-effect transistor-based capacitorless dynamic random-access memory with strong resistance to geometrical variations

Polycrystalline-Silicon-MOSFET-Based Capacitorless DRAM With Grain Boundaries and Its Performances

Simulation of capacitorless DRAM based on polycrystalline silicon with a vertical underlap structure and a separated channel layer

3-D stacked polycrystalline-silicon-MOSFET-based capacitorless DRAM with superior immunity to grain-boundary's influence

Capacitorless One-Transistor Dynamic Random-Access Memory with Novel Mechanism: Self-Refreshing

Disturbance Characteristics of 1T DRAM Arrays Consisting of Feedback Field-Effect Transistors

A Novel 3D 2TnC FeRAM Architecture and Operation Scheme with Improved Disturbance for High-Bit-Density Dynamic Random-Access Memory

A Semi-Floating Gate Memory with Tensile Stress for Enhanced Performance

A high-performance capacitorless 1T-DRAM based on Z-shaped electron-hole bilayer TFET and SiGe memory window

Capacitorless 1T-DRAM on crystallized poly-Si TFT

Nanoelectromechanical DRAM for Ultra-Large-scale Integration (ULSI)

Nanoscale Memory Cell Based on a Nanoelectromechanical Switched Capacitor

Novel Operation Scheme And Technological Optimization For 1t Bulk Capacitor-Less Dram

A Novel Capacitorless 1T DRAM with Embedded Oxide Layer

A FRAM technology using 1T1C and triple metal layers for high performance and high density FRAMs

The Programming Optimization of Capacitorless 1T DRAM Based on the Dual-Gate TFET

Progress in Z(2)-Fet 1T-Dram: Retention Time, Writing Modes, Selective Array Operation, and Dual Bit Storage

Design and Analysis of an Ultra-Dense, Low-Leakage, and Fast FeFET-Based Random Access Memory Array

Improvement in Retention Time of Capacitorless DRAM with Access Transistor

A Compact Capacitor-Less High-Speed DRAM Using Field Effect-Controlled Charge Regeneration

A 2T Dual Port Capacitor-Less DRAM