Abstract:High-density embedded nonvolatile memory (eNVM) at advanced technology nodes is still in great demand for SOC chips used in consumer electronics, self-driving cars, industrial control, and IoT edge devices. Although embedded NOR Flash is still main stream, its process complexity and high integration cost make it difficult to scale beyond 28nm. RRAM has become a promising alternative owing to its excellent scalability, low power, and compatibility with logic processes [1 –6]. However, several challenges still exist that restrict RRAM from practical eNVM applications, as shown in Fig. 24.2.1. 1) a high supply voltage is needed, because of high operation voltages and a considerable voltage drop on write path. 2) The IR drop on write path varies significantly with the distance of a cell from the peripheral circuits. 3) Prior self-write termination (SWT), with its abrupt cutoff, fails to form dense conductive filaments (CFs). While delayed termination helps to alleviate this issue, its delay time is not optimized for fast and slow cells [3]. 4) Previous read reference schemes that use a small number of HRS/LRS cells may collapse when encountering tail bits, resulting in a poor reference [6]. In this work, we demonstrate a 1Mb 14nm-FinFET RRAM with a $0.022 \\mu m^{2}$ cell size. The cell array is in a deep N-well with adequate P-substrate biasing to alleviate the difficulty of high voltage transfer. Placing the bit line (BL) and source line (SL) drivers on the top and bottom of the array reduces the IR-drop variation for near and far cells. Self-adaptive delayed termination (SADT) adjusts the termination time according to cell characteristics (fast or slow), helping to generate robust CFs. A read reference with multiple dummy 1T1R cells avoids the reference collapse issue. The test chip supports reliable read operation at a minimum supply voltage of 0.5V from $-40^{\\circ}C$ to $125^{\\circ}C$.

Design Space Exploration of FeRAM Bit Cell for DRAM Application

A Scalable Design of Multi-Bit Ferroelectric Content Addressable Memory for Data-Centric Computing

Design and Analysis of an Ultra-Dense, Low-Leakage, and Fast FeFET-Based Random Access Memory Array

Compact Modeling and Design Exploration of Non-Destructive Read-Out 1T1C FeRAM

FeRAM using Anti-ferroelectric Capacitors for High-speed and High-density Embedded Memory

Design and Simulation Analysis of a 3TnC MLC FeRAM Using a Nondestructive Readout and Offset-Canceled Sense Amplifier for High-Density Storage Applications

1T1C FeRAM Memory Array Based on Ferroelectric HZO With Capacitor Under Bitline

A 9-Mb HZO-Based Embedded FeRAM with 1012-Cycle Endurance and 5/7-Ns Read/Write Using ECC-Assisted Data Refresh and Offset-Canceled Sense Amplifier

A 9mb HZO-Based Embedded FeRAM with 1012-Cycle Endurance and 5/7ns Read/Write Using ECC-Assisted Data Refresh and Offset-Canceled Sense Amplifier

A 14nm-Finfet 1mb Embedded 1t1r Rram With A 0.022 Mu M(2) Cell Size Using Self-Adaptive Delayed Termination And Multi-Cell Reference

A Novel 3D 2TnC FeRAM Architecture and Operation Scheme with Improved Disturbance for High-Bit-Density Dynamic Random-Access Memory

24.2 A 14nm-FinFET 1Mb Embedded 1T1R RRAM with a 0.022µm<sup>2</sup> Cell Size Using Self-Adaptive Delayed Termination and Multi-Cell Reference

Multi-state Nonvolatile Capacitances in HfO2-based Ferroelectric Capacitor for Neuromorphic Computing

First demonstration of 2T0C-FeDRAM: a-ITZO FET and double gate a-ITZO/a-IGZO FeFET with a record-long multibit retention time of >4-bit and >2000 s

Working Principles and Performance Optimization of Nonvolatile 6T2C-SRAM with Hafnia-Based Ferroelectric Capacitors

Research on Circuit Design Techniques for 1 kbit Ferroelectric Random Access Memory

Hf0.5Zr0.5O2 1T−1C FeRAM Arrays with Excellent Endurance Performance for Embedded Memory

First Demonstration of Hafnia-based Selector-Free FeRAM with High Disturb Immunity through Design Technology Co-Optimization

Disturbance Characteristics of 1T DRAM Arrays Consisting of Feedback Field-Effect Transistors

Organic Ferroelectric-Based 1T1T Random Access Memory Cell Employing a Common Dielectric Layer Overcoming the Half-Selection Problem

Analysis of etched drain based Cylindrical agate‐all‐around tunnel field effect transistor based static random access memory cell design