Abstract:High-density embedded nonvolatile memory (eNVM) at advanced technology nodes is still in great demand for SOC chips used in consumer electronics, self-driving cars, industrial control, and IoT edge devices. Although embedded NOR Flash is still main stream, its process complexity and high integration cost make it difficult to scale beyond 28nm. RRAM has become a promising alternative owing to its excellent scalability, low power, and compatibility with logic processes [1 –6]. However, several challenges still exist that restrict RRAM from practical eNVM applications, as shown in Fig. 24.2.1. 1) a high supply voltage is needed, because of high operation voltages and a considerable voltage drop on write path. 2) The IR drop on write path varies significantly with the distance of a cell from the peripheral circuits. 3) Prior self-write termination (SWT), with its abrupt cutoff, fails to form dense conductive filaments (CFs). While delayed termination helps to alleviate this issue, its delay time is not optimized for fast and slow cells [3]. 4) Previous read reference schemes that use a small number of HRS/LRS cells may collapse when encountering tail bits, resulting in a poor reference [6]. In this work, we demonstrate a 1Mb 14nm-FinFET RRAM with a $0.022 \\mu m^{2}$ cell size. The cell array is in a deep N-well with adequate P-substrate biasing to alleviate the difficulty of high voltage transfer. Placing the bit line (BL) and source line (SL) drivers on the top and bottom of the array reduces the IR-drop variation for near and far cells. Self-adaptive delayed termination (SADT) adjusts the termination time according to cell characteristics (fast or slow), helping to generate robust CFs. A read reference with multiple dummy 1T1R cells avoids the reference collapse issue. The test chip supports reliable read operation at a minimum supply voltage of 0.5V from $-40^{\\circ}C$ to $125^{\\circ}C$.

Novel Multilevel Non-Destructive-Read-Out (ndro) Ferroelectric Floating-Gate Random Access Memory (Ffram)

Analog Content Addressable Memory using Ferroelectric: A Case Study of Search-in-Memory

Design and Simulation Analysis of a 3TnC MLC FeRAM Using a Nondestructive Readout and Offset-Canceled Sense Amplifier for High-Density Storage Applications

A Novel Cell and Array Architecture for Fet-Type Ferroelectric Nonvolatile Memories

A Novel Single-Fet Cell And Array Architecture For Ferroelectric Nonvolatile Memories

A Novel Chain Fram With Driven Plate Read Scheme

FETRAM. An Organic Ferroelectric Material Based Novel Random Access Memory Cell

C-AND: Mixed Writing Scheme for Disturb Reduction in 1T Ferroelectric FET Memory

Multipeak Coercive Electric-Field-Based Multilevel Cell Nonvolatile Memory With Antiferroelectric-Ferroelectric Field-Effect Transistors (FETs)

Compact Modeling and Design Exploration of Non-Destructive Read-Out 1T1C FeRAM

Research on Circuit Design Techniques for 1 kbit Ferroelectric Random Access Memory

Adaptive Circuit Approaches to Low-Power Multi-Level/Cell FeFET Memory

In-situ TEM Observation of Multilevel Storage Behavior in Low Power FeRAM Device

Design and Analysis of an Ultra-Dense, Low-Leakage, and Fast FeFET-Based Random Access Memory Array

Organic Nonvolatile 2T Memory Cell Employing a NOT‐Gate‐Like Architecture Toward Binary Output Level With Enhanced Noise Tolerance

Design Space Exploration of FeRAM Bit Cell for DRAM Application

Nonvolatile Memory Design Based on Ferroelectric FETs.

A 14nm-Finfet 1mb Embedded 1t1r Rram With A 0.022 Mu M(2) Cell Size Using Self-Adaptive Delayed Termination And Multi-Cell Reference

A Fundamental Study on Application of FeRAM in FPGA

A ferroelectric fin diode for robust non-volatile memory

A Novel 3D 2TnC FeRAM Architecture and Operation Scheme with Improved Disturbance for High-Bit-Density Dynamic Random-Access Memory