Stablity research and application of amorphous indium gallium zinc oxide tfts for active matrix organic light-emitting diode display

feilong zhao,dedong han,junchen dong,longyan wang,nannan zhao,yingying cong,zhuofa chen,xing zhang,shengdong zhang,yi wang
DOI: https://doi.org/10.1109/ICSICT.2014.7021640
2014-01-01
Abstract:High stability amorphous indium gallium zinc oxide (a-IGZO) thin-film transistors (TFTs) were fabricated on glass substrate without post annealing. The fabrication process and the stability of back channel etched (BCE) bottom gate a-IGZO TFTs on glass were proposed in detail. We studied the stability of the a-IGZO TFTs are subjected to the negative and positive gate bias stress. The threshold voltage (VTH) shift ΔVTH =-1.93V after 2000s negative gate bias stress. The ΔVTH =0.63V after 2000s positive gate bias stress. The threshold voltage shift of the TFT after 2.5×104s of constant bias stress (VGS = 20V, VDS = 5V) is as small as 1.3V. Furthermore, a negligible small amount of continuous drain current degradation over the entire constant voltage bias stress duration was observed. A 4.3×5.7cm2 active matrix organic light-emitting diode (AMOLED) panel driven by the a-IGZO TFTs with conventional two transistors and one capacitor (2T1C) pixel circuit was successfully fabricated.
What problem does this paper attempt to address?