Abstract:Defect annihilation of the IGZO/SiO2 layer is of great importance to enhancing the bias stress stabilities of bottom-gate coplanar thin-film transistors (TFTs). The effects of annealing temperatures (Ta) on the structure of the IGZO/SiO2 layer and the stabilities of coplanar IGZO TFTs were investigated in this work. An atomic depth profile showed that the IGZO/SiO2 layer included an IGZO layer, an IGZO/SiO2 interfacial mixing layer, and a SiO2 layer. Higher Ta had only one effect on the IGZO layer and SiO2 layer (i.e., strengthening chemical bonds), while it had complex effects on the interfacial mixing layer—including weakening M-O bonds (M: metallic elements in IGZO), strengthening damaged Si-O bonds, and increasing O-related defects (e.g., H2O). At higher Ta, IGZO TFTs exhibited enhanced positive bias temperature stress (PBTS) stabilities but decreased negative bias temperature stress (NBTS) stabilities. The enhanced PBTS stabilities were correlated with decreased electron traps due to the stronger Si-O bonds near the interfacial layer. The decreased NBTS stabilities were related to increased electron de-trapping from donor-like defects (e.g., weak M-O bonds and H2O) in the interfacial layer. Our results suggest that although higher Ta annihilated the structural damage at the interface from ion bombardment, it introduced undesirable defects. Therefore, to comprehensively improve electrical stabilities, controlling defect generation (e.g., by using a mild sputtering condition of source/drain electrodes and oxides) was more important than enhancing defect annihilation (e.g., through increasing Ta).

Thermal Annealing Improved Stability of Amorphous InGaZnO Thin-Film Transistors Under AC Bias Stresses

Influence of Annealing Temperatures on Solution-Processed Alinzno Thin Film Transistors

Highly Stable Atomic Layer Deposited Zinc Oxide Thin-Film Transistors Incorporating Triple O 2 Annealing

Dependence of Annealing on Stability of Transparent Amorphous InGaZnO Thin Film Transistor

Stability of Amorphous Inalzno Thin-Film Transistors

Cyclical Annealing Technique To Enhance Reliability of Amorphous Metal Oxide Thin Film Transistors

Enhanced Bias Stress Stability of A-Ingazno Thin Film Transistors by Inserting an Ultra-Thin Interfacial InGaZnO:N Layer

Improvement of Negative Bias Temperature Illumination Stability of Amorphous IGZO Thin-Film Transistors by Water Vapor-Assisted High-Pressure Oxygen Annealing

Bi-directional threshold voltage shift of amorphous InGaZnO thin film transistors under alternating bias stress

Atmosphere Effect in Post-Annealing Treatments for Amorphous InGaZnO Thin-Film Transistors with SiOx Passivation Layers

Effect of Two-Step Annealing on High Stability of a-IGZO Thin-Film Transistor

Increased Threshold Voltage of Amorphous InGaZnO Thin-Film Transistors After Negative Bias Illumination Stress

Effects of Annealing Temperature on Bias Temperature Stress Stabilities of Bottom-Gate Coplanar In-Ga-Zn-O Thin-Film Transistors

Two-step Degradation of A-Ingazno Thin Film Transistors under DC Bias Stress

Oxygen interstitial creation in a-IGZO thin-film transistors under positive gate-bias stress

Subgap State Engineering Using Nitrogen Incorporation to Improve Reliability of Amorphous InGaZnO Thin-Film Transistors in Various Stressing Conditions

Competition Between Heating and Cooling During Dynamic Self-Heating Degradation of Amorphous InGaZnO Thin-Film Transistors

Effect of annealing on characteristics of amorphous InGaZnO thin film transistors fabricated by sol-gel technical

Reduction of internal stress in InGaZnO (IGZO) thin film transistors by ultra-thin metal oxide layer

The Influence of Annealing Temperature on Amorphous Indium‐Zinc‐Tungsten Oxide Thin‐Film Transistors

Stablity research and application of amorphous indium gallium zinc oxide tfts for active matrix organic light-emitting diode display