Abstract:With the growing need for large area display technology and the push for a faster and cheaper alternative to the current amorphous indium gallium zinc oxide (a-IGZO) as the active channel layer for pixel-driven thin film transistors (TFTs) display applications, gallium tin zinc oxide (GSZO) has shown to be a promising candidate due to the similar electronic configuration of Sn4+ and In3+. In this work TFTs of GSZO sputtered films with only a few atomic % of Ga and Sn have been fabricated. A systematic and detailed comparison has been made of the properties of the GSZO films annealed at two temperatures: 140 °C and 450 °C. The electrical and optical stabilities of the respective devices have been studied to gain more insight into the degradation mechanism and are correlated with the initial TFT performance prior to the application of stress. Post deposition annealing at 450 °C of the films in air was found to lead to a higher atomic concentration of Sn4+ in these films and a superior quality of the film, as attested by the higher film density and less surface and interface roughness in comparison to the lower annealed temperature device. These result in significantly reduced shallow and deep interface traps with improved performance of the device exhibiting VON of −3.5 V, ION/IOFF of 108, field-effect mobility (μFE) of 4.46 cm2 V−1s−1, and sub-threshold swing of 0.38 V dec−1. The device is stable under both electrical and optical bias for wavelengths of 550 nm and above. Thus, this work demonstrates GSZO-based TFTs as a promising viable option to the IGZO TFTs by further tailoring the film composition and relevant processing temperatures.

Influence of Annealing Temperatures on Solution-Processed Alinzno Thin Film Transistors

Annealing Treatment on Amorphous InAlZnO Films for Thin-Film Transistors

Stability of Amorphous Inalzno Thin-Film Transistors

The Influence of Annealing Temperature on Amorphous Indium‐Zinc‐Tungsten Oxide Thin‐Film Transistors

Annealing Effect on Amorphous Indium-Zinc-Tungsten-Oxide Thin-Film Transistors

Performance Improvement of Atomic Layer-Deposited ZnO/Al2O3Thin-Film Transistors by Low-Temperature Annealing in Air

Effects of Annealing Process on Characteristics of Fully Transparent Zinc Tin Oxide Thin-Film Transistor

Defect Modification in Zninsno Transistor with Solution-Processed Al2o3 Dielectric by Annealing

High Performance RF Sputtering Deposited AZO Thin-Film Transistors after a Post-Annealing Process

Influence of Post-Annealing on Electrical Characteristics of Thin-Film Transistors with Atomic-Layer-Deposited Zno-Channel/Al2o3-Dielectric

Impact of pre-annealing process on electrical properties and stability of indium zinc oxide thin-film transistors

Effect of Annealing Temperature on Electrical Properties of ZTO Thin-Film Transistors

Transparent Amorphous Indium-Gallium-Zinc-Oxygen Thin Film Transistors Using Solution Technology at Low Temperature

Effect of Annealing Temperature on the Electrical Properties of ZnO Thin-Film Transistors

The Effects of Post Annealing Process on the Electrical Performance and Stability of Al-Zn-O Thin-Film Transistors

Solution-processed indium gallium zinc oxide thin-film transistors with infrared irradiation annealing

P‐1.12: Vacuum Annealing Treatment on High‐Performance AlZnO Thin Film Transistors

Effects of low‐temperature thermal annealing on interface characteristics in IZO/IGZO dual‐channel thin‐film transistors

The effect of annealing temperature on the stability of gallium tin zinc oxide thin film transistors

Fabrication of High-Performance A-Igzo Thin-Film Transistor with Post-Annealing Treatment

Effect of annealing atmosphere on IGZO thin film transistors on a deformable softening polymer substrate