Abstract:In this study, an inorganic–organic hybrid thin-film transistor (TFT) with a top-gate structure is prepared using an inorganic ZnSnO film prepared via pulse plasma deposition as the channel layer and an organic polymethyl methacrylate film prepared by the solution method as the dielectric layer. The effect of oxygen pressure during the preparation of the ZnSnO channel layer and channel-layer structure on ZnSnO TFT performance was studied. The results show that increasing the oxygen pressure during the preparation process can effectively inhibit the formation of oxygen vacancies in ZnSnO and reduce the concentration of electron carriers in ZnSnO, resulting in a reduced off current and a positive shift of the threshold voltage ( V th ) in the single-channel layer ZnSnO TFT. In addition, a high-resistivity ZnSnO layer (Lt; with a lower electron-carrier concentration) is embedded between the low-resistivity ZnSnO layer (Lb; with a higher electron-carrier concentration) and the dielectric layer to form a high-/low-resistivity double-channel-layer structure (Lt/Lb). By changing the thickness combination of Lt/Lb, the resistance of the channel layer and the number of carriers modulated by gate voltage in the channel layer can be optimized, thereby adjusting the device's on current (affecting device mobility) and key energy consumption parameters (i.e., V th and off current) to achieve independent control. Thus, the fabricated double-channel-layer ZnSnO TFT exhibits excellent performance: high mobility (3.28 cm 2 /Vs), positive V th close to 0 V (0.48 V), and on-to-off current ratio of > 10 5 .

Study of Ti Addition in Channel Layers for In–Zn–O Thin Film Transistors

Thin Film Transistors Based on In-Zn-Ti-O Oxide Channel Layer

InZnTiON Channel Layer for Highly Stable Thin-Film Transistors and Light-Emitting Transistors

Study of zinc tin oxide thin-film transistor

Effects of various oxygen partial pressures on Ti-doped ZnO thin film transistors fabricated on flexible plastic substrate

Effect of Titanium Cation Doping on the Performance of In2O3 Thin Film Transistors Grown via Atomic Layer Deposition

Ti Film Thickness Influences on the Back Channel Etched Amorphous InGaZnO4 Thin Film Transistors

Influences of Channel Metallic Composition on Indium Zinc Oxide Thin-Film Transistor Performance

Influence of the Channel Layer Thickness on Electrical Properties of Indium Zinc Oxide Thin-Film Transistor

Performance Enhancement of TiZO Thin Film Transistors by Introducing a Thin ITO Interlayer

Effect of O2 Incorporation During the Channel Fabrication Process on Aluminum-Doped Zinc Oxide Thin-Film Transistor Characteristics

Enhanced Performance of ZnO Thin-Film Transistors with ZnO Dual-Active-layer

Combustion-Solution Processed Amorphous ZnTiSnO Thin Films and Performances as Thin-Film Transistors

Top-gate thin-film transistors with amorphous ZnSnO channel layers prepared by pulsed plasma deposition

The Influence of Channel Layer Thickness on the Electrical Properties of Zno Tfts

Effects of channel structure consisting of ZnO/Al2O3 multilayers on thin-film transistors fabricated by atomic layer deposition

Solution-Processed Zinc Oxilde Thin Films and Top-Gate Thin Film Transistors

Structural Engineering Effects on Hump Characteristics of ZnO/InSnO Heterojunction Thin-Film Transistors

Enhanced Electrical Properties of Dual-Layer Channel ZnO Thin Film Transistors Prepared by Atomic Layer Deposition

Stability Enhancement of Low Temperature Thin-Film Transistors with Atomic-Layer-Deposited Zno:Al Channels

Effects of Channel Thickness on Electrical Performance and Stability of High-Performance InSnO Thin-Film Transistors