Abstract:In this study, an inorganic–organic hybrid thin-film transistor (TFT) with a top-gate structure is prepared using an inorganic ZnSnO film prepared via pulse plasma deposition as the channel layer and an organic polymethyl methacrylate film prepared by the solution method as the dielectric layer. The effect of oxygen pressure during the preparation of the ZnSnO channel layer and channel-layer structure on ZnSnO TFT performance was studied. The results show that increasing the oxygen pressure during the preparation process can effectively inhibit the formation of oxygen vacancies in ZnSnO and reduce the concentration of electron carriers in ZnSnO, resulting in a reduced off current and a positive shift of the threshold voltage ( V th ) in the single-channel layer ZnSnO TFT. In addition, a high-resistivity ZnSnO layer (Lt; with a lower electron-carrier concentration) is embedded between the low-resistivity ZnSnO layer (Lb; with a higher electron-carrier concentration) and the dielectric layer to form a high-/low-resistivity double-channel-layer structure (Lt/Lb). By changing the thickness combination of Lt/Lb, the resistance of the channel layer and the number of carriers modulated by gate voltage in the channel layer can be optimized, thereby adjusting the device's on current (affecting device mobility) and key energy consumption parameters (i.e., V th and off current) to achieve independent control. Thus, the fabricated double-channel-layer ZnSnO TFT exhibits excellent performance: high mobility (3.28 cm 2 /Vs), positive V th close to 0 V (0.48 V), and on-to-off current ratio of > 10 5 .

Effects of channel structure consisting of ZnO/Al2O3 multilayers on thin-film transistors fabricated by atomic layer deposition

High-Performance Thin-Film Transistors with ZnO/Al2O3 Superlattice Channel Fabricated by Atomic Layer Deposition

Enhanced Performance of Atomic Layer Deposited Thin-Film Transistors with High-Quality ZnO/Al 2 O 3 Interface

Bi-layer channel structure-based oxide thin-film transistors consisting of ZnO and Al-doped ZnO with different Al compositions and stacking sequences

Enhanced Electrical Properties of Dual-Layer Channel ZnO Thin Film Transistors Prepared by Atomic Layer Deposition

Transparent Thin-Film Transistors Using ZnMgO as Dielectrics and Channel

Bi-layer Channel AZO/ZnO Thin Film Transistors Fabricated by Atomic Layer Deposition Technique

High-performance Fully Transparent Al–Sn–Zn–O Thin-Film Transistors Using Double-Channel Structures

High-Performance Al–Sn–Zn–O Thin-Film Transistor with a Quasi-Double-Channel Structure

Top-gate thin-film transistors with amorphous ZnSnO channel layers prepared by pulsed plasma deposition

High-performance ZnO Thin-Film Transistors Prepared by Atomic Layer Deposition at Low Temperature

Effects of various oxygen partial pressures on Ti-doped ZnO thin film transistors fabricated on flexible plastic substrate

Fully transparent high performance thin film transistors with bilayer ITO/Al-Sn-Zn-O channel structures fabricated on glass substrate

Atomic Layer Deposition Deposited Al-Doped ZnO Films for Transistor Application

Enhanced Performance of ZnO Thin-Film Transistors with ZnO Dual-Active-layer

Dip-coated Al–In–Zn–O Thin-Film Transistor with Poly-Methylmethacrylate Gate Dielectric

Fully transparent al-doped ZnO thin-film transistors on flexible plastic substrates

Investigation on Transparent, Conductive ZnO:Al Films Deposited by Atomic Layer Deposition Process

P‐1.7: Atomic‐Layer‐Deposition Deposited Superlattice‐Structure Al‐Zn‐O Films for Thin Film Transistors Application

Stability Enhancement of Low Temperature Thin-Film Transistors with Atomic-Layer-Deposited Zno:Al Channels

Effect of Al Doping on Performance of ZnO Thin Film Transistors