Abstract:We present a dual active layer structure composed of indium–zinc oxide (InZnO) and indium–magnesium–zinc oxide (InMgZnO), which is fabricated using a simple solution process. By utilizing a heterojunction structure, combined with the high mobility of the front channel (InZnO) and the low ${\mathrm{\scriptstyle OFF}}$ -state current of the back channel (InMgZnO), we are able to achieve thin-film transistor (TFT) devices with enhanced performance and greater stability. Finally, we are able to optimize the device by optimizing the front channel thickness and treating the heterojunction interface with oxygen plasma, achieving a mobility ( $\mu _{\text {sat}}$ ) of 5.94 cm2/( $\text {V}\cdot \text {s}$ ), a threshold voltage of 0.98 V, an ${I} _{ { {\text {ON}}}}/{I} _{ { {\text {OFF}}}}$ ratio of $7.49\times 10^{{8}}$ , and a subthreshold swing (SS) of 325 mV/decade. Furthermore, the device maintains almost unchanged hysteresis voltage and exhibits high bias stability, which is demonstrated by the minimal threshold voltage variation of only 0.27 and −0.21 V under positive gate bias (PBS) and negative gate bias (NBS) for 1 h, respectively. The high electrical performance and stability of heterojunction TFTs can be attributed to the reduced interfacial defect state achieved through oxygen plasma treatment, as well as the electron redistribution occurring at the heterojunction interface.

Combustion-Solution Processed Amorphous ZnTiSnO Thin Films and Performances as Thin-Film Transistors

Amorphous ZnAlSnO Thin-Film Transistors by a Combustion Solution Process for Future Displays

Influence of Annealing Temperatures on Solution-Processed Alinzno Thin Film Transistors

Combustion-Process Derived Comparable Performances of Zn-(In:Sn)-O Thin-Film Transistors with A Complete Miscibility

High Performance of Y-doped Sn-Zn-O Films Fabricated by Solution-process for Amorphous Thin Film Transistors

Effect of Mg Content on Characteristics of Amorphous ZnMgSnO Thin-Film Transistors by a Combustion Solution Process

Solution-Processed Zinc Oxilde Thin Films and Top-Gate Thin Film Transistors

Solution-processed zinc oxide thin films and top-gate thin film transistors

Thin-Film Transistors Based on Amorphous ZnNbSnO Films with Enhanced Behaviors

Performance Improvement of Amorphous Thin-Film Transistors with Solution-Processed InZnO/InMgZnO Bilayer Channels

Characterization Of Amorphous Si-Zn-Sn-O Thin Films And Applications In Thin-Film Transistors

Thin Film Transistors Based on In-Zn-Ti-O Oxide Channel Layer

Ultrathin Amorphous ZnGexSnO Films for High Performance Ultra-Thin-film Transistors

High-Performance Thin-Film Transistors with ZnO/Al2O3 Superlattice Channel Fabricated by Atomic Layer Deposition

Full-solution-processed High Mobility Zinc-Tin-oxide Thin-Film-transistors

Effects of various oxygen partial pressures on Ti-doped ZnO thin film transistors fabricated on flexible plastic substrate

Achieving High Performance of ZnSnO Thin-Film Transistor via Homojunction Strategy

Solution-processed Stacked TiO2 and Al2O3 Dielectric Layers for High Mobility Thin Film Transistor

Combustion-assisted low-temperature ZrO 2 /SnO 2 films for high-performance flexible thin film transistors

Performance Enhancement of Fully Transparent Tin-Doped Zinc Oxide Thin-Film Transistors Fabricated by Sputtering at Low Temperature

High-Performance Transistors Based on Zinc Tin Oxides by Single Spin-Coating Process