Abstract:To fabricate oxide thin-film transistors (TFTs) with high performance and excellent stability, preparing high-quality semiconductor films in the channel bulk region and minimizing the defect states in the gate dielectric/channel interfaces and back-channel regions is necessary. However, even if an oxide transistor is composed of the same semiconductor film, gate dielectric/channel interface, and back channel, its electrical performance and operational stability are significantly affected by the thickness of the oxide semiconductor. In this study, solution process-based nanometer-scale thickness engineering of InZnO semiconductors was easily performed via repeated solution coating and annealing. The thickness-controlled InZnO films were then applied as channel regions, which were fabricated with almost identical film quality, gate dielectric/channel interface, and back-channel conditions. However, excellent operational stability and electrical performance suitable for oxide TFT backplane was only achieved using an 8 nm thick InZnO film. In contrast, the ultrathin and thicker films exhibited electrical performances that were either very resistive (high positive VTh and low on-current) or excessively conductive (high negative VTh and high off-current). This investigation confirmed that the quality of semiconductor materials, solution process design, and structural parameters, including the dimensions of the channel layer, must be carefully designed to realize high-performance and high-stability oxide TFTs.

Solution-processed zinc oxide thin films and top-gate thin film transistors

Solution-Processed Zinc Oxilde Thin Films and Top-Gate Thin Film Transistors

Fully solution-induced high performance indium oxide thin film transistors with ZrOx high-k gate dielectrics

Effect of Solution Concentrations on Crystal Structure, Surface Topographies and Photoluminescence Properties of ZnO Thin Films

Effect of solution concentration on surface morphology, optical properties and solar light response of ZnO thin films

Eco-Friendly, Water-Induced In2O3 Thin Films for High-Performance Thin-Film Transistors and Inverters

Solution-Processed Zinc Oxide Thin-Film Transistors with a Low-Temperature Polymer Passivation Layer

Study of zinc tin oxide thin-film transistor

Full-solution-processed High Mobility Zinc-Tin-oxide Thin-Film-transistors

Cluster Size Control Toward High Performance Solution Processed InGaZnO Thin Film Transistors

High-Performance Transistors Based on Zinc Tin Oxides by Single Spin-Coating Process

Synthesis of ZnO Nanowires for Thin Film Network Transistors

Preparation and Properties of Solution-Processed Zinc Tin Oxide Films from a New Organic Precursor

High Mobility Thin-Film Transistor with Solution-Processed Hafnium-Oxide Dielectric and Zinc-Indium-Tin-Oxide Semiconductor

Enhancement of electrical properties of solution-processed oxide thin film transistors using ZrO<sub>2</sub> gate dielectrics deposited by an oxygen-doped solution

Solution Process-Based Thickness Engineering of InZnO Semiconductors for Oxide Thin-Film Transistors with High Performance and Stability

Enhanced Performance of ZnO Thin-Film Transistors with ZnO Dual-Active-layer

Fabrication and Properties of InGaZnO Thin-Film Transistors Based on a Sol–Gel Method with Different Electrode Patterns

Combustion-Solution Processed Amorphous ZnTiSnO Thin Films and Performances as Thin-Film Transistors

Chemical and Electrical Properties of Low-Temperature Solution-Processed In–Ga–Zn-O Thin-Film Transistors

Enhanced Mobility Of Solution-Processed Polycrystalline Zinc Tin Oxide Thin-Film Transistors Via Direct Incorporation Of Water Into Precursor Solution