Abstract:In this work, a thin film transistor (TFT) with Zr-doped aluminum-zinc-tin oxide (Zr-AZTO) semiconductor as active layer was investigated. The Zr-AZTO thin films were co-sputtered by ZrO2 and AZTO targets (RF-Sputter) in Ar, and annealed at 350 degrees C in air atmosphere. With the discharge power of AZTO increasing from 100 W to 120 W, the content of Zr element decreases from 0.63 +/- 0.01 at.% to 0.34 +/- 0.01 at.%, and the oxygen vacancy decreases from (19.0 +/- 0.1)% to (17.3 +/- 0.8)%. The results of Zr-AZTO thin film show that the main factor is the co-sputter power of ZrO2 target. With the co-sputter power of ZrO2 increasing from 15 W to 45 W, the content of Zr element increases from 0.63 +/- 0.01 at.% to 2.79 +/- 0.01 at.%, the content of oxygen vacancy decreases from (19.0 +/- 0.1)% to (14.1 +/- 0.1)%, Eg increases from 2.76 eV to 2.86 eV, and the root mean square (RMS) roughness firstly decreases from 0.402 nm to 0.387 nm and then increases to 0.490 nm. The Micro Wave Photo Conductivity Decay (mu-PCD, LTA-1620SP) was used to measure the quality of Zr-AZTO thin film and the mean peak and D value decreases from 139.3 mV to 80.9 mV and from 1.54 to 0.77 as the co-sputter power of ZrO2 increases from 15 W to 45 W, which means it has highest localized states and defects in high ZrO2 co-sputter power. The devices prepared at 15 W (ZrO2)/100 W (AZTO) co-sputter show a best performance, with a mu(sat) of 8.0 +/- 0.6 cm(2)/(V.S), an Ion/loff of (2.01 +/- 0.34) x 10(6), and a SS of 0.18 +/- 0.03 V/dec. The device of Sample B has a 0.5 V negative shift under -20 V NBS and 9.6 V positive shift under 20 V PBS.

High-Performance Transistors Based on Zinc Tin Oxides by Single Spin-Coating Process

Study of zinc tin oxide thin-film transistor

Highly Stable Atomic Layer Deposited Zinc Oxide Thin-Film Transistors Incorporating Triple O 2 Annealing

Performances and Preparation of Zinc-Tin Oxide Thin-Film Transistors

High-Performance Amorphous Zinc–Tin–Oxide Thin-Film Transistors With Low Tin Concentration

High-Performance Amorphous Zinc–Tin–Oxide Thin-Film Transistors with Low Tin Concentration

Solution-Processed Zinc Oxide Thin-Film Transistors with a Low-Temperature Polymer Passivation Layer

ZnSnO thin-film transistors by reactive co-sputtering of Zn and Sn metal targets

Solution-Processed Zinc Oxilde Thin Films and Top-Gate Thin Film Transistors

Enhanced Performance of ZnO Thin-Film Transistors with ZnO Dual-Active-layer

Full-solution-processed High Mobility Zinc-Tin-oxide Thin-Film-transistors

High performance of ZnSnO thin-film transistors engineered by oxygen defect modulation

Solution-processed zinc oxide thin films and top-gate thin film transistors

Analysis of the Valence State of Tin in ZnSnO X Thin-Film Transistors

Simultaneous Enhancement of Electrical Performance and Stability of Zinc-Tin-oxide Thin-Film Transistors by Tantalum Doping

The Performance Of Zr-Doped Al-Zn-Sn-O Thin Film Transistor Prepared By Co-Sputtering

High-Performance Al–Sn–Zn–O Thin-Film Transistor with a Quasi-Double-Channel Structure

Performance Enhancement of Solution-Processed InZnO Thin-Film Transistors by Al Doping and Surface Passivation

Solution-based SnGaO thin-film transistors for Zn- and In-free oxide electronic devices

Achieving High Performance of ZnSnO Thin-Film Transistor via Homojunction Strategy

High Performance Rf Sputtering Deposited Zno Thin-Film Transistors