Abstract:HfO2-based resistive random-access memory (RRAM) with a Ti buffer layer has been extensively studied as an emerging nonvolatile memory (eNVM) candidate because of its excellent resistive switching (RS) properties and CMOS process compatibility. However, a detailed understanding of the nature of Ti thickness-dependent RS and systematic thermal degradation research about the effect of post-metallization annealing (PMA) time on oxygen vacancy distribution and RS performance still needs to be included. Herein, the impact of Ti buffer layer thickness on the RS performance of the Al/Ti/HfO2/TiN devices is first addressed. Consequently, we have proposed a simple strategy to regulate the leakage current, forming voltage, memory window, and uniformity by varying the thickness of the Ti layer. Moreover, it is found that the device with 15 nm Ti shows the minimum cycle-to-cycle variability (CCV) and device-to-device variability (DDV), good retention (105 s at 85 °C), and superior endurance (104). In addition, thermal degradation of the Al/Ti(15 nm)/HfO2/TiN devices under different PMA times at 400 °C is carried out. It is found that the leakage current increases and the forming voltage and memory window decrease with the increase in PMA time due to the thermally activated oxidation of the Ti. However, when the PMA time increases to 30 min, the Ti can no longer capture oxygen from HfO2 due to the formation of self-limited TiOx. Therefore, the device shows superior thermal stability with a PMA time of 90 min at 400 °C and no degradation of the memory window, uniformity, endurance, or retention. This work demonstrates that the Ti/HfO2-based RRAM shows superior back-end-of-line compatibility with high thermal stability up to 400 °C for over an hour.

High Performance Unipolar AlOy/HfOx/Ni Based RRAM Compatible with Si Diodes for 3D Application

Ti/HfO2-Based RRAM with Superior Thermal Stability Based on Self-Limited TiOx

A Self-Rectifying $\hbox{hfo}_{x}$ -Based Unipolar RRAM with NiSi Electrode

Resistive switching of silicon-rich-oxide featuring high compatibility with CMOS technology for 3D stackable and embedded applications

HfOx based vertical resistive random access memory for cost-effective 3D cross-point architecture without cell selector

Rectifying Characteristics and Implementation of N-Si/hfo2 Based Devices for 1D1r-Based Cross-Bar Memory Array

HfOx-based vertical resistive switching random access memory suitable for bit-cost-effective three-dimensional cross-point architecture.

Ni Electrode Unipolar Resistive RAM Performance Enhancement by $\hbox{alo}_{y}$ Incorporation into $\hbox{hfo}_{x}$ Switching Dielectrics

Design of CMOS Compatible, High-Speed, Highly-Stable Complementary Switching with Multilevel Operation in 3D Vertically Stacked Novel HfO2/Al2O3/TiO x (HAT) RRAM

A Self-Rectifying and Forming-Free HfOx Based-High Performance Unipolar RRAM

Scaling and Operation Characteristics of HfOx Based Vertical RRAM for 3D Cross-Point Architecture

Novel self-compliance Bipolar 1D1R memory device for high-density RRAM application

A novel self-selection bipolar RRAM cell with ultra-low operation currents for cross-point application

Resistive Switching Behaviours and Novel Device Applications of Metal-Oxide-Si/Ge Structures

Bipolar One Diode–one Resistor Integration for High-Density Resistive Memory Applications

1S1R Device with Self-Compliance Property for High Density Cross-Point Memory Applications

Super non-linear RRAM with ultra-low power for 3D vertical nano-crossbar arrays.

High uniformity and stability of 1S1R directly stacked for high-density cross-point memory applications

Ru-Based Oxide Resistive Random Access Memory For Beol-Compatible Novel Nvm Applications

3D RRAM: Design and optimization

High-density WOx-based RRAM with a W-doped AlOx insertion layer