Abstract:This article presents a wideband millimeter-wave (mmWave) receiver front-end that covers the frequency range from 43 to 97 GHz, supporting the operation in the major parts of the V-, E-, and W-bands. The front-end incorporates a passive mixer-first topology to achieve high linearity and wideband performance. The front-end adopts I/Q generation at the RF port, using a coupled-line coupler (CLC), rather than at the local oscillator (LO) port to mitigate the crosstalk of the overlapping I/Q LO signals especially present at high frequencies. The CLC at the RF input facilitates ultrawide band input matching. The front-end implements the multi-gate gm3 cancellation technique at the IF amplifiers to preserve the linearity and provide gain at the IF section. Image rejection capabilities using a current mode transformer-based IF 90° coupler are implemented on chip and demonstrated with measurements. The front-end prototype is fabricated on the GlobalFoundries 22-nm FD-SOI CMOS process and it demonstrates an ultra-wideband performance across the frequency range 43–97 GHz (2.25:1 bandwidth) with image rejection of up to 32 dB, IIP3 of 1.6–5.2 dBm, and gain of 15 dB. The implementation used is low-IF topology with 3.8-GHz IF frequency and 1-GHz bandwidth. Furthermore, the measurement results show that the front-end supports high-speed modulated signals of up to 6-Gbps 64QAM modulation data.

Design of a High-Linearity RF Front-End with IP2 Calibration for SAW-less WCDMA Receivers.

A Low-Power Low-Noise Direct-Conversion Front-End with Digitally Assisted IIP2 Background Self Calibration

A high-linearity receiver RF front-end with a high-performance 25%-duty-cycle LO generator for WCDMA/GSM applications

Analysis and Design of a High-Linearity Receiver RF Front-End with an Improved 25%-Duty-cycle LO Generator for WCDMA/GSM Applications

Digitally Assisted IIP2 Calibration for CMOS Direct-Conversion Receivers

High-Linearity Direct Conversion Receiver with the Transconductance Equalization Technique and DCOC Method

A 0.1-1.9Ghz 65nm CMOS Variable-Gain Mixer-First Receiver with DSA and Noise-Shaping TIA.

A High Performance 2-Ghz Direct-Conversion Front End with Single-Ended RF Input in 0.13 Um CMOS

A 0.13&#x03bc;m CMOS UWB Receiver Front-End Using Passive Mixer

A 2.4ghz Low Noise High Linearity RF Front-End Design.

A+21.2 Dbm Out-Of-Band Iip3 0.2-3ghz Rf Front-End Using Impedance Translation Technique

A High-Linearity WCDMA/GSM Reconfigurable Transceiver in 0.13- CMOS

A 2.1–2.5 GHz high linearity and low noise down-conversion active mixer

A 0.1–5.0 GHz Flexible SDR Receiver with Digitally Assisted Calibration in 65 Nm CMOS

A Dual-Mode Analog Baseband Utilizing Digital-Assisted Calibration for WCDMA/GSM Receivers

A 0.07–3 GHz Wideband Front-End for SDR Receiver with 2.3 Db NF and 12 Dbm IIP<sub>3</sub> in 65 Nm CMOS

A RF CMOS Zero-IF Receiver Front-end for GSM/EDGE

A 43–97-GHz Mixer-First Front-End With Quadrature Input Matching and On-Chip Image Rejection

A CMOS Analog Integrated Front End for L Band DAB Receiver

A Low Power 3–5 GHz CMOS UWB Receiver Front-End

A High Linearity Variable Gain LNA for WCDMA Receiver Front-End