Abstract:The amplitude and phase imbalances of the in-phase (I) and quadrature (Q) branches inherent in the direct conversion receiver structure cause the generation of image frequency interference signals. In this paper, a frequency-domain I/Q imbalance calibration algorithm is proposed for wideband direct conversion receivers. The I/Q imbalance model is rebuilt by applying the infinitesimal method and FFT algorithm. The mathematical expressions for the exact computation of the I/Q imbalance parameters are derived based on the frequency-domain statistical properties of the baseband signal. The two phase parameters, frequency-dependent I/Q imbalance (FD-IQI) and frequency-independent I/Q imbalance (FI-IQI), are separated according to the parity properties of the imbalance parameter. To avoid the interference from the transmitter, the receiver impairment estimation is performed using a frequency offset (FO) DC training signal, and a low-cost real-valued compensation (RVC) filter is introduced to correct the impairments of the received signal. The performances of the proposed calibration model are evaluated through simulations and experiments. The simulation results show that the image rejection ratio (IRR) is improved to 80-120 dBc and can also exceed 40 dBc at high noise levels. The experimental results based on the CX9261A evaluation board show that the average IRR of the multi-tone signal is increased by 24.99 dB, and the IRR of the wideband signal is increased by 19.08 dB.

A Dual-Mode Analog Baseband Utilizing Digital-Assisted Calibration for WCDMA/GSM Receivers

A Dual-Mode Analog Baseband with Digital-Assisted Dc-Offset Calibration for Wcdma/Gsm Receivers

A Low-Power Low-Noise Direct-Conversion Front-End with Digitally Assisted IIP2 Background Self Calibration

An Effective DC Offset Calibration Method Combined with Analog and Digital Circuits for Direct Conversion Receivers

Digitally Assisted IIP2 Calibration for CMOS Direct-Conversion Receivers

Analog baseband for WCDMA implementation by using digital-controlled DC Offset Cancellation

A Sub-1-GHz Band High-Dynamic-Range Receiver with Integrated Self-Adaptive Multipart AGC Loops

Broadband Linearity Enhancement Method for a 1.3 GHz-2.5 GHz Digitally-Assisted Oscillator in a 55-Nm CMOS Technology

A Frequency-Domain I/Q Imbalance Calibration Algorithm for Wideband Direct Conversion Receivers Using Low-Cost Compensator.

High-Linearity Direct Conversion Receiver with the Transconductance Equalization Technique and DCOC Method

Design of a High-Linearity RF Front-End with IP2 Calibration for SAW-less WCDMA Receivers.

Analysis and Design of a High-Linearity Receiver RF Front-End with an Improved 25%-Duty-cycle LO Generator for WCDMA/GSM Applications

A high-linearity receiver RF front-end with a high-performance 25%-duty-cycle LO generator for WCDMA/GSM applications

A Multi-Mode Reconfigurable Analog Baseband With I/Q Calibration For Gnss Receivers

A 0.1–5.0 GHz Flexible SDR Receiver with Digitally Assisted Calibration in 65 Nm CMOS

A 1.8-V, 5-Ma Reconfigurable Analog Baseband Circuit for Low-if Multi-Mode Multi-Band Receivers

A High-Linearity WCDMA/GSM Reconfigurable Transceiver in 0.13- CMOS

A Highly Linear Filter and VGA with DC-Offset Correction for GSM/WCDMA Receivers

Adaptive Digital Calibration Techniques for Narrow Band Low-If Receivers with On-Chip Pll

An Asymmetric Dual-Channel Reconfigurable Receiver For Gnss In 180nm Cmos