Abstract:In comparison with other tungsten oxide nanostructures, W 18O49 nanostructures have exhibited better field emission behaviors [1], which should have a much better future in field emission devices. Recently, we have developed a new method to fabricate patterned W 18O49 nanowire arrays, which combines thermal evaporation with lift-off technology. However, it is found that the phosphoric acid processing of the lift-off technology has strong influence on the field emission property of W18O49 nanowires. For example, typical turn-on field of tungsten oxide nanowires after the treatment of the acid is about 10 MV/m, which is much higher than that of the untreated W 18O49 nanowires (3-5 MV/m). In addition, the homogeneity of emission patterns and the stability of emission current also become relatively worse after acid treatment. Until now, what leads to their unstable field emission behaviors after the lift-off process is still not clear to our knowledge, which can limit the development of the lift-off technique to fabricate nanostructure patterns. Therefore, finding the influencing factors resulting in their relatively poorer field emission performance by lift-off way is very essential. © 2010 IEEE.

Fabrication of patterned aligned W18O49 nanowire arrays with high field emission performances

A novel lift-off method for fabricating patterned and vertically-aligned W18O49 nanowire arrays with good field emission performance.

Controlled synthesis of patterned W18O49 nanowire vertical-arrays and improved field emission performance by in situ plasma treatment

A catalyzed-growth route to directly form micropatterned WO2 and WO3 nanowire arrays with excellent field emission behaviors at low temperature

Field-Emission Properties of Nanostructured Wo3 Arrays Fabricated Using Tungsten Hot-Filament Chemical Vapor Deposition

A Low-Temperature Method to Selected-Area Synthesis of Tungsten Oxide Nanowire Arrays and Investigation on Their Field Emission Properties

P1-8: Low temperature gowth and field emission properties of patterned tungsten oxide nanowire arrays by using cceramic template

P1–8: Low Temperature Gowth and Field Emission Properties of Patterned Tungsten Oxide Nanowire Arrays by Using Cceramic Template

High FE current density from tungsten oxide nanowires

The time of phosphoric acid processing has effects on the field emission property of W18O49 Nanowires

A General Approach For Fabricating Arc-Shaped Composite Nanowire Arrays By Pulsed Laser Deposition

Fabrication of ZnO Nanowire Field Emitter Arrays with Self-Aligned Focus Electrode Structure

OS1503 Development of Highly Ordered Silicon Nanowire Array

Fabrication of ZnO Nanowire Field-Emitter Arrays with Focusing Capability

Fabrication of ZnO Nanowires by Vapor-Phase Deposition and Their Field Emission Properties

Fabrication of ZnO nanowire field emitter arrays with non-coplanar focus electrode structure

Enhanced Field Emission from Large-Area Arrays of W <sub>18</sub> O <sub>49</sub> Pencil-Like Nanostructure

Aligned SiC Porous Nanowire Arrays with Excellent Field Emission Properties Converted from Si Nanowires on Silicon Wafer

Enhanced Field Emission from Large-Area Arrays of W18o49 Pencil-Like Nanostructure

A New Method for Bulk-Quantity Synthesis of Patterned Well-Aligned Zno Nanowire Arrays

Improvement of Field Emission Uniformity of Tungsten Oxide Nanowire Arrays Via In-Situ Plasma Treatment