Abstract:A simulation and optimization method for noise reduction of an internal combustion engine was proposed and used to evaluate the interior noise change before and after the engine noise optimization.Finite element models of the engine and dash panel were constructed and validated by modal analysis technology.The flexible multi-body dynamic method was employed to calculate the engine vibration response with which the structural radiated noise was detected via boundary element codes.Then,the optimal design of the engine block was implemented to improve its stiffness and make global modal frequencies apart from excitation peak frequencies,aiming at reducing the structural response and radiated noise.An acoustic coupled model of the engine and dash panel was constructed to calculate the acoustic power transmitted from the engine surface through the dash panel into the interior before and after the block optimization.The results show that the optimal scheme for the block substantially lower the structural radiated noise,as well as that of the engine.After making clear the acoustic transmission path between the engine and interior,it is found that the interior noise can be distinctly reduced,which proves the feasibility and effectiveness of the optimal design.

Radiation Noise of External Thin-Wall Components in Diesel Engine

Sound Insulation Performance and Transmission Noise of Engine Covers of Diesel Engine

Study on the Identification of Noise Sources and Reducing Noise for Diesel Engine

Identification and Evaluation of Diesel Engine Noise Source Based on Acoustic Intensity

Engine Noise Source Identification with Different Methods

Prediction of Engine Block's Radiation Noise and Low-Noise Design

Numerical Analysis of Noise Radiation from Refrigerator Compressor Shell

Vibration and Noise Research on Oxygen Generator and Structural Optimization

Experimental Study on Diesel Engine Noise

Investigation on Noise Sources Identification of Diesel Engine by Means of Acoustic Signals Analysis

Finite Element Method Simulation Analysis for Sound Field of Exhaust Muffler

Low-Noise Design of Stamping Parts in Diesel Engines

A Research on Prediction and Reduction of Radiated Noise from Oil Pan of Diesel Engine

The Low Noise Thin-Wall Engine Component Design Based on the Combined FEM-BEM Method and Topology Optimization

Application of Virtual Prediction Method to Low-Noise Diesel Engine Design

Vibration and noise reduction for a 490 diesel engine body

Acoustic Prediction Method of Engine Thin-Walled Parts Considering Transmission Noise

Experimental Study on the Noise Source Identification of a Diesel Engine of Passenger Car

Study of Noise Source Identification and Noise Control of A Gasoline Engine

A Research on the Design of Low-noise Oil-pan Based on FEM and BEM

Coupled optimization of internal combustion engine radiated noise and interior noise