Abstract:Compared to the linear frequency domain method, the transient Computational Fluid Dynamics (CFD) method is more effective when analyzing the effect of complex flow in the muffler on its acoustic characteristics. However, most of the existing CFD methods focus on the calculation of the transmission loss (TL) for the muffler only. The other evaluation parameters, such as noise reduction (NR), are rarely investigated. In this paper, a CFD approach was developed systematically for charactering TL, NR, and transfer matrix (TM) of the muffler in the cases without and with exhaust flow. In the proposed approach, only one mesh model with a correction pipe is needed based on two simulation runs. The non-reflective boundary was used as the termination of the correction pipe in the calculation for the TL, while the reflective pressure boundary was set on the correction pipe end in the calculation for the NR. The TM was then derived from the time-domain pressure and mass velocity obtained in the previous runs for calculating TL and NR. The proposed CFD approach was applied to two simple expansion chambers, and the computational predictions of TL, NR, and TM were validated successfully both with the measured results and the analytical results. In conclusion, the proposed CFD approach is effective for full characterization (TL, NR, and TM) of exhaust mufflers without and with exhaust flow.

Finite Element Method Simulation Analysis for Sound Field of Exhaust Muffler

Numerical Simulation and Structure Optimization of Compressor Muffler

Numerical Analysis of Acoustic Characteristic of Muffler with Complicated Structure and Structural Optimization

Numerical Analysis and Structure Improvement of Automotive Exhaust Muffler's Acoustic Characteristics

Numerical Analysis on Acoustic Characteristics of Automotive Exhaust Muffler by Transfer Matrix Method

Numerical simulation and test validation for performance of a muffler in an exhaust pipe

A Study on the Numerical Simulation Method for the Acoustic Performance of Exhaust Catalytic Muffler

Modal Analysis and Structure Design for Hydraulic Muffler

Simulation and Improvement of Silencer at Turbocharger Outlet

A Computational Fluid Dynamics Approach for Full Characterization of Muffler Without and with Exhaust Flow

Numerical Analysis Of Noise Radiation Of Compressor Shell Considering Lubrication Oil

The Holistic Finite Element Model Analysis of Diesel Engine

Exhaust Muffler Design Based on CFD

Theoretical Study on a Water Muffler

Study on the Calculation of the Acoustical Transfer Property of Exhaust Muffler

CFD Analysis of a Transfer Matrix of Exhaust Muffler with Mean Flow and Prediction of Exhaust Noise

Test and Numerical Simulation for Fluid Dynamic Characteristics of Dual Mode Mufflers

Research on the Influence of Characteristics of the Annular Connecting Pipe on the Transmission Loss of the Expanded Exhaust Muffler

Modeling, attenuation and flow field analysis of diesel engine muffler using fluid structure interaction approach and experimental analysis

Study on the Acoustic Performance of Perforated Duct Muffler

Evaluation Method of Vehicle Muffler's Comprehensive Performance under Multiple Working Conditions