Abstract:As the speed of the new generation of high-speed electric multiple units (EMU) increases, the requirements for vibration and noise reduction in traction gear trains are becoming higher and higher. Although most researchers have focused on the vibration mechanics analysis of gears, the actual noise has the most direct impact on passenger experience and safety. To address this problem, a new type of curved cylindrical gear is proposed to analyze the dynamic characteristics of the gear pair and predict its radiated noise based on the acoustic-vibration coupling theory using the finite element-boundary element method. Parametric modeling of the gear pair using CREO and assembly motion analysis were performed. ANSYS was used to analyze the stress distribution, inherent frequency, and inherent vibration pattern of the gear pair, and harmonic response analysis was performed using the modal superposition method to solve the displacement frequency response curve and vibration characteristics. ACTRAN was used to construct the free-field model, create acoustic excitation based on the acoustic-vibration coupling equation, set the field points, and predict radiated noise. The research results show that the noise is mainly concentrated in the tooth meshing area, and the root mean square RMS range of its sound pressure level value is 91–100 dB. Its dynamic characteristics and noise values are in line with the traction requirements of high-speed EMU, providing a new idea for improving the noise prediction of traction gears for new generation high-speed EMU, which in turn strongly support the noise control of high-speed EMU stock and thus improve the passenger experience and driving environment.

Acoustic Prediction Method of Engine Thin-Walled Parts Considering Transmission Noise

Investigation of Noise Characteristics of Electric Vibrator Utilizing Acoustic Camera and Transfer Path Analysis

Prediction method of radiated noise by engine block

Numerical Analysis on Acoustic Characteristics of Automotive Exhaust Muffler by Transfer Matrix Method

Simulation and Experimental Research on Vibration and Noise of Transmission

Research on Prediction Method of Radiated Noise of Engine Oil Pan

Vibration and noise reduction for a 490 diesel engine body

Study of NVH performance improvement for a four-cylinder diesel engine body

Extraction of Intake Acoustic Source and Prediction of Intake Noise of a Turbocharged Engine

Research on dynamic characteristics and radiation noise of a helicopter main reducer based on finite element and boundary element method

Aeroacoustic prediction for cooling fan using convolution quadrature boundary element method

Engine Noise Source Identification with Different Methods

A Research on Prediction and Reduction of Radiated Noise from Oil Pan of Diesel Engine

A Research on the Design of Low-noise Oil-pan Based on FEM and BEM

Integrated Virtual-Design Methods for Forecasting Radiated Noise of Single Cylinder Diesel Block

Aerodynamic noise prediction of passenger vehicle with hybrid detached eddy simulation/acoustic perturbation equation method

Noise Prediction Study of Traction Arc Tooth Cylindrical Gears for New Generation High-Speed Electric Multiple Units

Vibro-acoustic characteristics of gear-rotor-bearing coupled system under multi-source excitation

Coupled Analysis of Engine Noise and Interior Noise of an Automobile

Prediction and Evaluation of Acoustic Performance of Silencer for Turbocharger Outlet

CFD Analysis of a Transfer Matrix of Exhaust Muffler with Mean Flow and Prediction of Exhaust Noise