Abstract:Low-frequency noise induced by vehicle-bridge coupling vibration is harmful to people's health and living environment.The investigation for the sound pressure level and the radiation mechanism of such kind of noise offers important accordance for assessment of environmental noise pollution and noise control.In this paper,the transient noise induced by vehicle-bridge coupling vibration is investigated by proposing a solving system based on FEM and BEM.A steel continuous bridge with three spans in service is studied as the case.The transient noise produced by vehicle-bridge coupling vibration is investigated by experiment and numerical simulation.Results show that the sound field properties in both time and frequency domains can be calculated by the proposed solving system,through which a more comprehensive assessment of sound pressure level and sound field distribution could be obtained.And the precision of the method is also validated.It is found that the sound pressure of the steel half-through girder bridge is great because the small stiffness and large sound radiation area of the steel plates.And the noise is induced mainly by the steel plates of the bridge.The traffic impacts while the vehicle traveling into and out of the bridge only affect the sound pressure in the neighborhood of the bridge abutment.The shape of contour lines in the area around the bridge deck looks like arcs.The sound pressures in the central area of the cross section of the bridge are greater than those in the two sides.

Research on Prediction Method of Radiated Noise of Engine Oil Pan

A Research on Prediction and Reduction of Radiated Noise from Oil Pan of Diesel Engine

A Research on the Design of Low-noise Oil-pan Based on FEM and BEM

Numerical Analysis Of Noise Radiation Of Compressor Shell Considering Lubrication Oil

Investigation of Noise Characteristics of Electric Vibrator Utilizing Acoustic Camera and Transfer Path Analysis

Numerical analysis of the influence of lubrication oil on noise radiation of compressor shell

Prediction method of radiated noise by engine block

Numerical Analysis of Noise Radiation from Refrigerator Compressor Shell

Analysis on Low-Frequency Noise Induced by Vehicle-Bridge Coupling Vibration

Assessment of Sound Pressure of Transient Noise Radiated from Vehicle-Bridge Coupling Vibration

Aerodynamic Noise Prediction of a Centrifugal Fan Considering the Volute Effect Using IBEM

Identification and Evaluation of Diesel Engine Noise Source Based on Acoustic Intensity

Low Noise Design of Oil Pan Based on Topography Optimization

Research on Loudness of Radiation Noise of a Constrained-Layer Damping Oil Pan

Engine Noise Source Identification with Different Methods

Prediction of Engine Block's Radiation Noise and Low-Noise Design

An effective vibration reduction concept for automotive applications based on granular-filled cavities

Acoustic Prediction Method of Engine Thin-Walled Parts Considering Transmission Noise

Application of Virtual Prediction Method to Low-Noise Diesel Engine Design

Study on the Identification of Noise Sources and Reducing Noise for Diesel Engine

Study of Noise Source Identification and Noise Control of A Gasoline Engine