Abstract:Considering the spiral-like flow in regenerative blower,and using the panel method and the modeling method of flow field under propeller,a theoretical model was set up to calculate the aerodynamic load on blade surface. Based on the FW-H equation,the regenerative blower's shell was simplified.With the thin shell theory and the Lagrange energy method,a dynamic model of regenerative blower's shell was set up.Using the boundary integral method,a theoretical calculation model of far field sound radiation of the shell was established.The distribution of sound radiation shows that the shell sound radiation is mainly in circumference,which is consistent with the test result.The calculation time consumption is greatly reduced using the theoretical calculation proposed than using the commercial software. According to the model,the influences of blade number,blade thickness,blade width and blade angle on shell sound radiation under the rotational noise excitation were studied.The sound pressure level (SPL)decreases with the increase of blade number.The blade thickness nearly has no effect on the SPL.With the increase of blade width,the SPL decreases at first and then increases.As the blade angle increases,the SPL of forward-curved blade increases and that of backward-curved blade decreases.

Numerical Analysis of Noise Radiation from Refrigerator Compressor Shell

Numerical analysis of the influence of lubrication oil on noise radiation of compressor shell

Numerical Analysis Of Noise Radiation Of Compressor Shell Considering Lubrication Oil

The Inner Acoustic Field Variety Due to the Effect of Refrigerator Compressor Oil Based on Finite Element Analysis

Vibration and Noise Research on Oxygen Generator and Structural Optimization

Numerical Simulation and Structure Optimization of Compressor Muffler

Research on the Influencing Factors of Vibro-acoustic Characteristics of Cylindrical Shells Based on Statistical Energy Analysis

Acoustical Contribution Calculation and Analysis of Compressor Shell Based on Acoustic Transfer Vector Method

Noise Analysis and Control of Reciprocating Refrigerators Compressor

Study on Influencing Factors for Sound Radiation Characteristics of Finite Length Cylindrical Shells

Numerical Prediction of Radiation Noise for Vibrating Shell of a Regenerative Blower in Fuel-cell Vehicles

Analysis of Structural Vibration and Radiated Noise of Gearbox Shells

Sound radiation of regenerative blower's shell under the rotational noise excitation of blades

Numerical Analysis of Acoustic Performance for Compressor Mufflers in Refrigerators

Reduction of Radiated Noise from Rotary Compressors by Acoustic Interference Effects

Noise Dignosis and Studies on Decreasing Noise for Reciprocating Compressor

Elementary Study on Influence of Structural Stress Parameters on Radiation Noise of Double Cylindrical Shell

Experiment and Simulation Analysis on Noise Reduction of Cylindrical Shells with Viscoelastic Material

Pressure Analysis in A Compressor Cylinder Based on Detached Eddy Simulation and Dynamic Mesh

Control of noise generated from centrifugal refrigeration compressor

The Numerical Analysis of Vibration and Sound Radiation Efficiency from a Cylindrical Shell