Abstract:Current researches mainly focus on the investigations of the valve plate utilizing pressure relief grooves. However, air-release and cavitation can occur near the grooves. The valve plate utilizing damping holes show excellent performance in avoiding air-release and cavitation. This study aims to reduce the noise emitted from an axial piston pump using a novel valve plate utilizing damping holes. A dynamic pump model is developed, in which the fluid properties are carefully modeled to capture the phenomena of air release and cavitation. The causes of different noise sources are investigated using the model. A comprehensive parametric analysis is conducted to enhance the understanding of the effects of the valve plate parameters on the noise sources. A multi-objective genetic algorithm optimization method is proposed to optimize the parameters of valve plate. The amplitudes of the swash plate moment and flow rates in the inlet and outlet ports are defined as the objective functions. The pressure overshoot and undershoot in the piston chamber are limited by properly constraining the highest and lowest pressure values. A comparison of the various noise sources between the original and optimized designs over a wide range of pressure levels shows that the noise sources are reduced at high pressures. The results of the sound pressure level measurements show that the optimized valve plate reduces the noise level by 1.6 dB(A) at the rated working condition. The proposed method is effective in reducing the noise of axial piston pumps and contributes to the development of quieter axial piston machines.

Low Noise Design of Oil Pan Based on Topography Optimization

Low-Noise Design of Stamping Parts in Diesel Engines

A Research on the Design of Low-noise Oil-pan Based on FEM and BEM

Low Noise Design of Cylinder Head Cover Based on Multi-objective Topography Optimization

Research on Loudness of Radiation Noise of a Constrained-Layer Damping Oil Pan

Numerical Analysis Of Noise Radiation Of Compressor Shell Considering Lubrication Oil

The Low Noise Thin-Wall Engine Component Design Based on the Combined FEM-BEM Method and Topology Optimization

Design of a Low Noise Engine Gear Cover Based on Topology and Shape Optimization

A Research on Prediction and Reduction of Radiated Noise from Oil Pan of Diesel Engine

Vibration and Noise Research on Oxygen Generator and Structural Optimization

Research on Prediction Method of Radiated Noise of Engine Oil Pan

Noise Pollution Reduction Through a Novel Optimization Procedure in Passive Control Methods

Numerical and Experimental Studies on Housing Optimization for Noise Reduction of an Axial Piston Pump

Coupled optimization of internal combustion engine radiated noise and interior noise

A Study on Noise Reduction of Gear Pumps of Wheel Loaders Based on the ICA Model

A New Design Method for the Transition Region of the Valve Plate for an Axial Piston Pump

Low noise optimization of two-stage gearbox housing structure based on acoustic contribution analysis and topology optimization

Low Noise Design of a Gear-Cover Based on Modal Analysis and Topology Optimization

Study on the Identification of Noise Sources and Reducing Noise for Diesel Engine

Noise Reduction of an Axial Piston Pump by Valve Plate Optimization

Building FEM Model and Structural Optimization for Oil Pan on HyperWorks