Abstract:High sound quality and low radiated noise are two dominant demands for the vibro-acoustic performance of internal combustion engines. Such engines with high acoustic quality will greatly improve the acoustic environment both inside and outside of the passenger compartment of an automobile. In this paper, this performance of the block of a four-cylinder diesel engine was simulated and bench-tested. Then the vibro-acoustic problems were diagnosed and optimized. The finite element analysis method was adopted to numerically analyze the natural modes of the block. The finite-element model of the block was verified by the experimental modal analysis utilizing the single-input and multiple-output technology. The results indicate that the modal frequency errors from the simulation and experiment are permissible in respect of engineering and the accuracy of the finite-element model highly matching the real one is validated. Then, the flexible multi-body dynamics model of the diesel engine was constructed and excited by the boundary conditions comprised of in-cylinder gas pressures, cylinder liner-piston contact induced lateral forces and valve system motion induced impact forces. The simulated vibration velocity levels from the block surface were obtained under the rated condition (75kW/3600rpm) and well verified by the bench test. Boundary element analysis method was employed to acquire the radiated acoustic pressures from the block surface in the frequency range of interest. Optimized schemes are implemented to the block surface in order to reduce the radiated noise and enhance the sound quality of the diesel engine. Finally, the optimal block was cast. And the bench-test results indicate that the sound quality of the new-block engine is substantially improved. The research achievements validate the feasibility and reliability of the optimal design for the block.

Low Noise Design of Cylinder Head Cover Based on Multi-objective Topography Optimization

Noise Pollution Reduction Through a Novel Optimization Procedure in Passive Control Methods

Numerical Analysis of Acoustic Characteristic of Muffler with Complicated Structure and Structural Optimization

Low Noise Design of a Gear-Cover Based on Modal Analysis and Topology Optimization

Numerical Simulation and Structure Optimization of Compressor Muffler

Low-Noise Design of Stamping Parts in Diesel Engines

Structural Multi-objective Optimization Design of Air-suspending Frictionless Pneumatic Cylinders

The Low Noise Thin-Wall Engine Component Design Based on the Combined FEM-BEM Method and Topology Optimization

Low Noise Design of Oil Pan Based on Topography Optimization

Prediction of Engine Block's Radiation Noise and Low-Noise Design

A Research on Improving the NVH Performance of Flywheel Cover

The Simulation Analysis of Radiated Noise from a Gearbox Cover of Motorcycle

Coupled optimization of internal combustion engine radiated noise and interior noise

Application of Virtual Prediction Method to Low-Noise Diesel Engine Design

A Research on the Design of Low-noise Oil-pan Based on FEM and BEM

Integrated Virtual-Design Methods for Forecasting Radiated Noise of Single Cylinder Diesel Block

Low noise optimization of two-stage gearbox housing structure based on acoustic contribution analysis and topology optimization

Numerical and Experimental Studies on Housing Optimization for Noise Reduction of an Axial Piston Pump

Sound quality improvement for a four-cylinder diesel engine by the block structure optimization

The Optimization Of Vibration Induced By A V6 Engine Cooling Module

Vibration and noise reduction for a 490 diesel engine body