Abstract:High sound quality and low radiated noise are two dominant demands for the vibro-acoustic performance of internal combustion engines. Such engines with high acoustic quality will greatly improve the acoustic environment both inside and outside of the passenger compartment of an automobile. In this paper, this performance of the block of a four-cylinder diesel engine was simulated and bench-tested. Then the vibro-acoustic problems were diagnosed and optimized. The finite element analysis method was adopted to numerically analyze the natural modes of the block. The finite-element model of the block was verified by the experimental modal analysis utilizing the single-input and multiple-output technology. The results indicate that the modal frequency errors from the simulation and experiment are permissible in respect of engineering and the accuracy of the finite-element model highly matching the real one is validated. Then, the flexible multi-body dynamics model of the diesel engine was constructed and excited by the boundary conditions comprised of in-cylinder gas pressures, cylinder liner-piston contact induced lateral forces and valve system motion induced impact forces. The simulated vibration velocity levels from the block surface were obtained under the rated condition (75kW/3600rpm) and well verified by the bench test. Boundary element analysis method was employed to acquire the radiated acoustic pressures from the block surface in the frequency range of interest. Optimized schemes are implemented to the block surface in order to reduce the radiated noise and enhance the sound quality of the diesel engine. Finally, the optimal block was cast. And the bench-test results indicate that the sound quality of the new-block engine is substantially improved. The research achievements validate the feasibility and reliability of the optimal design for the block.

Coupled optimization of internal combustion engine radiated noise and interior noise

Coupled Analysis of Engine Noise and Interior Noise of an Automobile

Numerical Simulation and Structure Optimization of Compressor Muffler

Numerical Analysis of Acoustic Characteristic of Muffler with Complicated Structure and Structural Optimization

Sound quality improvement for a four-cylinder diesel engine by the block structure optimization

Experimental Validation of Sound Quality Simulation and Optimization of a Four-Cylinder Diesel Engine

Vibration and noise reduction for a 490 diesel engine body

Application of Virtual Prediction Method to Low-Noise Diesel Engine Design

Prediction of Engine Block's Radiation Noise and Low-Noise Design

The Optimization Of Vibration Induced By A V6 Engine Cooling Module

Study of NVH performance improvement for a four-cylinder diesel engine body

Noise Pollution Reduction Through a Novel Optimization Procedure in Passive Control Methods

Sharpness Simulation and Optimization of a Direct Injection Diesel Engine Noise

Prediction method of radiated noise by engine block

A study on optimization design of engine-room NVH for a modified vehicle

Mechanism and Optimization of Fuel Injection Parameters on Combustion Noise of DI Diesel Engine

Study on Optimization Method of GDI Engine Combustion Noise Based on Noise-Performance Map

Low Noise Design of Cylinder Head Cover Based on Multi-objective Topography Optimization

Sound absorption structure optimization based on material absorption models and noise rating curves

Study on the Identification of Noise Sources and Reducing Noise for Diesel Engine

Low-noise structure optimization of a heavy commercial vehicle cab based on approximation model