Abstract:Low-frequency noise has always been a thorny problem in the field of noise control. In recent years, the development of sound-absorbing metastructures has provided new ideas for low-frequency noise control. In this paper, we propose low-frequency sound-absorbing metastructures constructed by Helmholtz resonators with embedded slit. Analytical and numerical models were established to analyze the sound absorption performance and mechanism of the proposed sound-absorbing metastructure, and optimization design was conducted to achieve low-frequency wideband absorption performance. The analytical modeling method and the performance of the proposed sound-absorbing metastructure were also experimentally verified. The main conclusions are summarized as follows: 1) Based on the use of transfer matrix method and finite element method, analytical and numerical models for calculation of sound absorption coefficient were established. It was shown that analytical predictions are in good agreement with numerical calculations. It was demonstrated that a typical design of a single-cell metastructure with 30mm thickness can achieve a sound absorption coefficient of 0.88 at 404 Hz. Typical designs of two-cell and the four-cell parallel structures (with 50 mm thickness) can achieve two and four near-perfect low-frequency sound absorption peaks within the frequency band of 200-400 Hz, respectively. 2) The low-frequency sound absorption mechanisms of the proposed metastructure were explained from four aspects: simplified equivalent model parameters, normalized acoustic impedance, complex-plane zero/pole distribution, sound pressure cloud image and particle velocity field distribution. It was demonstrated that the main sound absorption mechanism is associated with the thermal viscous loss of sound waves caused the inner wall of embedded slit. 3) Optimization design for broadband low-frequency absorption performance was carried out by using differential evolution optimization algorithm. A parallel-multi-cell coupled metastructure with multiple perfect sound absorption peaks below 500Hz was optimized. Under the condition of thickness 90mm, the sound absorption coefficient curve of an optimized metastructure exhibited 8 near-perfect sound absorption peaks and an average sound absorption coefficient of 0.86 within the frequency range of 170-380 Hz. 4) Experimental samples were fabricated to carry out sound absorption tests. Experimental results were basically consistent with the analytical predictions. Mutual verification of analytical model, numerical calculation and experimental measurements was completed. To sum up, the sound-absorbing metastructures proposed in this paper have outstanding sound absorption performance at low frequencies with sub-wavelength thickness. We demonstrated they are suitable for low frequency broadband sound absorption below 500 Hz. Thanks to their thin thickness and relatively simple construction, they have broad application prospects in practical noise control engineering.

Sound absorption structure optimization based on material absorption models and noise rating curves

Modeling of Acoustic Characteristics of a Cab with Response Surface Method and Its Application

Noise Pollution Reduction Through a Novel Optimization Procedure in Passive Control Methods

Low-noise structure optimization of a heavy commercial vehicle cab based on approximation model

Acoustic Modelling and Analysis of Vehicle Interior Noise Based on Numerical Calculation

Modeling and optimization of sound absorption coefficient of microperforated compressed porous metal panel absorber

Acoustic performance of a multi-layer vehicle interior trim sound-absorbing material

Analysis and Optimization of the Noise Reduction Performance of Sound-Absorbing Materials in Complex Environments

Optimization design of the sound absorbing structure of double-layer porous metal material with air layer based on genetic algorithm

Coupled optimization of internal combustion engine radiated noise and interior noise

Adjustable sound absorbing metastructures for low-frequency variable discrete sources

Acoustic Topology Optimization of a Truck Cab Based on Coupled Panel Contribution Analysis

Optimization design of a micro-perforated panel absorber with 8.6 octave bands

Optimization of the Acoustic Performance of a Composite Multi-cell Sound Absorber

Acoustic optimisation design for suspension characteristics based on the method of dynamic subsystem modification

Mechanism analysis and optimal design of sound-absorbing metastructure constructed by slit-embedded Helmholtz resonators

Sound-Absorption Mechanism of Structures with Periodic Cavities

Design and Optimization of Low-Frequency Broadband Acoustic Absorption Structures Based on Multi-Cellular Element Co-Coupling

MODELING AND DESIGN METHODOLOGIES FOR SOUND ABSORBING POROUS MATERIALS WHEN USED AS LAYERED VIBRATION DAMPERS

Sound absorption performance based on Auxetic microstructure model: a parametric study

Improving sound quality inside vehicle by active noise control method