Abstract:This article studies the vibration and noise of an electric–mechanical–hydraulic power coupler. The combined approximate model is used to optimize the triangular groove structure to reduce the fluid noise. Based on the analysis of the harmonic amplitude of radial electromagnetic force, the structure of the rotor and stator is optimized. Finally, the article analyzes the electro‐hydraulic coupling noise. This article proposes a new electric–mechanical–hydraulic power coupler (EMHPC). The EMHPC is integrated by a swash plate axial piston pump and permanent magnet synchronous motor, which can realize the conversion of electric, mechanical, and hydraulic energy. To analyze the noise characteristics of the EMHPC, the mathematical models of fluid noise and electromagnetic noise are established, respectively. An optimization model is built based on Isight, and the multi‐island genetic algorithm is used to optimize the triangular groove structure. The optimization results show that the sound pressure level of sound field monitoring points decreases at different frequencies, and the vibration displacement of the cylinder block decreases. The maximum sound pressure level of the directivity curve of the radiated sound field decreases by 9 dB. For the electrodynamic structure optimization of the EMHPC, this article establishes a combination approximation model with higher accuracy. The structure of the stator and rotor is optimized based on the combined approximate model. The optimization results show that the sinusoidal property of the radial air‐gap magnetic density curve is better after optimization, and the harmonic amplitude of the radial electromagnetic force decreases. The maximum sound pressure level in the air domain of the external sound field is reduced from 69 to 60 dB. Moreover, the superposition analysis of fluid noise and electromagnetic noise is carried out, and the main noise sources of the EMHPC in different working modes are determined.

The Low Noise Thin-Wall Engine Component Design Based on the Combined FEM-BEM Method and Topology Optimization

A General Approach to Tune the Vibration Properties of the Mounting System in the High-Speed and Heavy-Duty Engine

A Research on the Design of Low-noise Oil-pan Based on FEM and BEM

Low Noise Design of a Gear-Cover Based on Modal Analysis and Topology Optimization

Low-Noise Design of Stamping Parts in Diesel Engines

Low noise optimization of two-stage gearbox housing structure based on acoustic contribution analysis and topology optimization

Low Noise Design of Cylinder Head Cover Based on Multi-objective Topography Optimization

Low Noise Design of Oil Pan Based on Topography Optimization

The Simulation Analysis of Radiated Noise from a Gearbox Cover of Motorcycle

Vibration and noise reduction for a 490 diesel engine body

Optimization of the Housing Shape Design for Radiated Noise Reduction of an Agricultural Electric Vehicle Gearbox

Study on the Identification of Noise Sources and Reducing Noise for Diesel Engine

Numerical and Experimental Studies on Housing Optimization for Noise Reduction of an Axial Piston Pump

Prediction of Engine Block's Radiation Noise and Low-Noise Design

Noise Analysis and Optimization Design of an Electric–Mechanical–Hydraulic Power Coupler for the Vehicle

A Research on Improving the NVH Performance of Flywheel Cover

Research on dynamic characteristics and radiation noise of a helicopter main reducer based on finite element and boundary element method

A multi-objective optimization design approach of large mining planetary gear reducer

Application of Virtual Prediction Method to Low-Noise Diesel Engine Design

Multi-Objective Optimization for Noise Reduction of IPMSM Based on Non-Uniform Air Gap

Vibro-acoustic characteristics of gear-rotor-bearing coupled system under multi-source excitation