Abstract:Advanced high-strength steel is widely used in automobile production and manufacturing, for its advantages of light weight, high strength, and good formability. Compared with common steel plate, higher forming forces are required during the stamping forming process of advanced high-strength steel plate due to its continuous strength improvement. The higher forming forces directly result in a sharp increase in the reactive force on the stamping die, which easily cause inevitable fatigue deformation and damage fracture. In view of the above problems, the stamping forming process of an advanced high-strength steel anti-collision beam part and the loading bearing condition of the stamping die were explored. On basis of the theory of topology optimization, the structure of the stamping die was optimized to obtain the qualified stamping parts and the lesser quality punch. A method based on the node contact force conversion was proposed, and the reactive force on the stamping die during the forming process was obtained to function as the load boundary condition of topology optimization. Geometric reconstruction of the stamping die was implemented referring to the topology optimization results. The final result reveals that the lightweight punch and the qualified stamping part without fatigue deformation can be efficiently achieved through topology optimization.

Low-Noise Design of Stamping Parts in Diesel Engines

Study on Simulation of Stamping Forming and Die Surface Optimization of Aluminum Alloy Plate

Low Noise Design of Oil Pan Based on Topography Optimization

Vibration and Noise Research on Oxygen Generator and Structural Optimization

A Research on the Design of Low-noise Oil-pan Based on FEM and BEM

Low Noise Design of Cylinder Head Cover Based on Multi-objective Topography Optimization

Development of Drawing Die for Heat-Shield Panel of Automobile Engine Based on Finite Element

The Low Noise Thin-Wall Engine Component Design Based on the Combined FEM-BEM Method and Topology Optimization

Numerical Analysis of Acoustic Characteristic of Muffler with Complicated Structure and Structural Optimization

Prediction of Engine Block's Radiation Noise and Low-Noise Design

Study on the Identification of Noise Sources and Reducing Noise for Diesel Engine

A New Design Method for the Transition Region of the Valve Plate for an Axial Piston Pump

A Research on Prediction and Reduction of Radiated Noise from Oil Pan of Diesel Engine

Low noise optimization of two-stage gearbox housing structure based on acoustic contribution analysis and topology optimization

Numerical and Experimental Studies on Housing Optimization for Noise Reduction of an Axial Piston Pump

Research on Loudness of Radiation Noise of a Constrained-Layer Damping Oil Pan

A 6-Sigma Robust Optimization Method for Stamping Forming of Automobile Covering Parts Based on Residual Error and Radial Basis Interpolation

Study of Noise Source Identification and Noise Control of A Gasoline Engine

Structural design of stamping die of advanced high-strength steel part for automobile based on topology optimization with variable density method

Optimization of Valve Plate Applied in Secondary Unit and Noise Reduction

Coupled optimization of internal combustion engine radiated noise and interior noise