Abstract:This study focuses on applying intelligent modeling methods to different injection molding process parameters, to analyze the influence of temperature distribution and warpage on the actual development of auto locks. It explores the auto locks using computer-aided engineering (CAE) simulation performance analysis and the optimization of process parameters by combining multiple quality characteristics (warpage and average temperature). In this experimental design, combinations were explored for each single objective optimization process parameter, using the Taguchi robust design process, with the L18 (21 × 37) orthogonal table. The control factors were injection time, material temperature, mold temperature, injection pressure, packing pressure, packing time, cooling liquid, and cooling temperature. The warpage and temperature distribution were analysed as performance indices. Then, signal-to-noise ratios (S/N ratios) were calculated. Gray correlation analysis, with normalization of the S/N ratio, was used to obtain the gray correlation coefficient, which was substituted into the fuzzy theory to obtain the multiple performance characteristic index. The maximum multiple performance characteristic index was used to find multiple quality characteristic-optimized process parameters. The optimal injection molding process parameters with single objective are a warpage of 0.783 mm and an average temperature of 235.23 °C. The optimal parameters with multi-objective are a warpage of 0.753 mm and an average temperature of 238.71 °C. The optimal parameters were then used to explore the different cooling designs (original cooling, square cooling, and conformal cooling), considering the effect of the plastics temperature distribution and warpage. The results showed that, based on the design of the different cooling systems, conformal cooling obtained an optimal warpage of 0.661 mm and a temperature of 237.62 °C. Furthermore, the conformal cooling system is smaller than the original cooling system; it reduces the warpage by 12.2%, and the average temperature by 0.46%.

A 6-Sigma Robust Optimization Method for Stamping Forming of Automobile Covering Parts Based on Residual Error and Radial Basis Interpolation

Multi-objective Robust Optimization of Injection Molding Process Parameters Based on TOPSIS

Study on Simulation of Stamping Forming and Die Surface Optimization of Aluminum Alloy Plate

Parameters Optimization of Tailor Welded Blank Forming Process

Parameter Optimization of Roundness Quality Control for Machined Parts Based on Grey relational Analysis

An Adaptive Design Method for Understanding Tolerance in the Precision Stamping Process

Optimization of stamping process parameters based on an improved particle swarm optimization–genetic algorithm and sparse auto-encoder–back-propagation neural network model

A Robust Optimization Design Method for Sheet Metal Roll Forming and Its Application in Roll Forming Circular Cross-Section Pipe

Multi-Objective Optimization of Process Parameters in 6016 Aluminum Alloy Hot Stamping Using Taguchi-Grey Relational Analysis

Numerical Optimization of Variable Blank Holder Force Trajectories in Stamping Process for Multi-Defect Reduction

Part weight control via model free optimization for injection molding

Multiobjective Optimization Method for Polymer Injection Molding Based on a Genetic Algorithm

Modelization And Simulation Of Sheet Forming Process Closed-Loop Control System Based On Time Series Analysis Theory

Automated Process Parameters Tuning for an Injection Moulding Machine with Soft Computing

Multi-objective optimization of parametric design for profile ring rolling process based on residual stress control

Multi-objective optimization of concave radial forging process parameters based on response surface methodology and genetic algorithm

A method combining optimization algorithm and inverse-deformation design for improving the injection quality of box-shaped parts

A real-time process optimization system for injection molding

Multi-Objective Optimization of Dimensional Accuracy in Electric Hot Incremental Sheet Forming

Robustness optimization of engine mounting system based on Six Sigma and torque roll axis decoupling method

Application of Intelligent Modeling Method to Optimize the Multiple Quality Characteristics of the Injection Molding Process of Automobile Lock Parts