Abstract:This investigation delves into the residual stresses that arise during the deep drawing process of laser-welded blanks (LWBs) using a combination of experimental and numerical methods. While LWBs are preferred for their low distortion and high-quality welds, they are subjected to detrimental residual stresses during forming operations that can adversely affect their service life. The primary objective of this study is to evaluate the influence of five essential process parameters, namely welding power, welding speed, blank holder forces (BHF), friction coefficient, and material properties, on the residual stresses that are generated during the welding and forming of LWBs. Moreover, the study seeks to optimize these process parameters for the deep drawing process utilized in this investigation using response surface methodology (RSM). The hole-drilling method, a commonly used experimental technique for measuring residual stresses, was employed in this study to measure the residual stresses in different zones of laser-welded blanks (LWBs). The measurements were performed using a strain gauge rosette and were repeated three times to ensure accuracy. In addition, the Simufact package and Abaqus Unified FEA software are utilized to simulate the laser beam welding and forming processes, respectively. The close alignment between experimental and simulated outcomes suggests that the model is suitable for numerical simulation of the LWB deep drawing process (less than 10%). By conducting an analysis of variance, the main factors that influence the residual stresses in the welding and forming processes are identified. The findings suggest that welding power–welding speed (30.89%) and BHF (21.65%) have the most significant impact on residual stresses. Furthermore, selecting BHF = 50140.67N, friction coefficient = 0.2, welding speed = 7.4 mm/s, and welding power = 144.79W can enhance the confidence coefficient of the welding zone design.

Parameters Optimization of Tailor Welded Blank Forming Process

Multi-objective Robust Optimization of Injection Molding Process Parameters Based on TOPSIS

Study on Formability of Tailor Welded Blanks Based on Numerical Simulation

The Forming Limits Prediction Model for Tailor Welded Blank with Straight Seam

Welding Process Carbon Footprint Analysisand Process Parameters Optimization

Topological and Parameter Optimization Design on Front Platen of Injection Molding Machine

Process Parameter Optimization in Refill Friction Spot Welding of 6061 Aluminum Alloys Using Response Surface Methodology

Multi-objective optimization of T-shaped bilateral laser welding parameters based on NSGA-II and MOPSO

An optimization method of wall thickness distributions in T-shaped tube compound-forming method with unconventional tube blank

Welding Process Optimization Methods: A Review

Thermo-mechanical simulation and parameters optimization for beam blank continuous casting

Multi-objective optimization of concave radial forging process parameters based on response surface methodology and genetic algorithm

Process Parameters Optimization for Sheet Metal Forming During Drawing with a Multi-Objective Genetic Algorithm

Numerical Simulation and Process Optimization of Internal Thread Cold Extrusion Process

Multi-objective optimization of the resistance spot welding process using a hybrid approach

Intelligent optimization of non-rigidly supported stationary shoulder friction stir welding parameters

Multi-objective optimization of mechanical quality and stability during micro resistance spot welding

Numerical simulation and welding parameters optimization for minimum deformation of AHSS based on RSM & QGA

Numerical Optimization of Variable Blank Holder Force Trajectories in Stamping Process for Multi-Defect Reduction

Insight into the Key Process Parameters on Residual Stress Distribution in Deep Drawing of Laser-Welded Blanks: Response Surface Modeling

Optimization‐improved thermal–mechanical simulation of welding residual stresses in welded connections