Abstract:Mechanical behaviour of twenty-eight longitudinal lap-welded joints made of high strength steels (HSS) under tension load was investigated by experimental and numerical study. Weaknesses due to traditional deformation measurements for fillet welded joints can be perfectly solved by digital image correlation techniques (DIC). Distribution and development of strain field throughout the specimens along the whole loading process were recorded by DIC measurement. The effect of parameters (e.g. weld size, weld length and mismatch ratio) on mechanical properties (e.g. ultimate strength, failure modes, weld ductility and fracture angle) of longitudinal fillet welds and transverse fillet welds, which was introduced in detail in previous work by the authors, were compared. Generally, because of the difference on the combination of shear force and tension force, the fracture angle of longitudinal welded specimens (around <math>50∘</math>) were much more divergent from transverse welded specimens (around <math>20∘</math>) even though both of them failed at welded zone (welded zone only refers to weld metal in this paper), resulting that the mean strength of longitudinal welded specimens were only 0.58 time of transverse welded specimens. Conversely, the mean deformation capacity of longitudinal welded specimens was almost 4.0 times of transverse welded specimens. All longitudinal welded specimens have "platform" or "decline" feature while all transverse welded specimens have "rise" or "platform" feature load-deformation curves. Generally, the specimens with "rise" feature load-deformation curve are more likely to suffer sudden fracture, while specimens with "decline" or "platform" feature have satisfactory ductility performance. Based on the strain distribution and development features provided by DIC measurement, a new strength criterion, in which the ultimate strain obtained in relevant coupon tests was an indicator, was proposed and through the comparison between the numerical results and test results, its validation was verified by FE simulation. Moreover, it was confirmed that the predicted loads of EC3 and AISC Specification were close and slightly conservative for all specimens.

Study on Formability of Tailor Welded Blanks Based on Numerical Simulation

Parameters Optimization of Tailor Welded Blank Forming Process

Investigation on the Formability of Tailor-Welded Blanks

The Forming Limits Prediction Model for Tailor Welded Blank with Straight Seam

Numerical analysis of stress & strain and thickness variation in single point incremental forming of tailor welded steel blanks

Comparison of different welding methods on mechanical properties and formability behaviors of tailor welded blanks (TWB) made from AA6061 alloys

A different attempt to improve the formability of aluminum tailor welded blanks (TWB) produced by the FSW

Research on the non-uniform deformation of deep drawing tailor-welded square boxes

Influence of Friction Stir Weld Seam Distribution on Spun Formed Workpieces

Numerical investigation of controllable non-uniform deformation of tailor-welded blanks using heterogeneous pressure-carrying medium

Optimizing tailor rolled blanks: a computational study on mechanical and deformation properties

SPIF of micro-FSWed dissimilar AlMgSi alloy: formability analysis

Finite element synthesized analysis of the forming process of spiral welded pipe

Evolution of in-plane stresses induced fracture behaviors of Tailor Welded Blanks subjected to non-uniformly distributed load

An Experimental Study On Friction Stir Welding Of Aluminum-Magnesium Alloys For Improved Mechanical Properties Of Tailor Welded Blanks.

Mechanisms Affecting the Difference in Fatigue Resistance Between Welds and Base Materials Were Investigated Based on In-Situ Fatigue Method

A Tensile Specimen of Tailor Rolled Blanks with Equal Probability in Yield and Its Mechanical Behavior Analysis

An Experimental and Numerical Study on Aluminum Alloy Tailor Heat Treated Blanks

Influence of thickness and strength on plastic instability in tailored steel structures

Enhancing ductility and post-aging strength of tailor welded blanks through pre-aging friction stir welding

Mechanical behaviour of longitudinal lap-welded joints of high strength steel: Experimental and numerical analysis