Abstract:Automobile lightweight can effectively save fuel consumption and reduce CO, emissions. Aluminum and its alloys are desirable for the automotive industry due to their excellent high-strength to weight ratio. However, due to the introduction of the welding seam, it has brought new changes to the forming process, especially to the forming limit. To establish a reasonable forming limit curve (FLC) analysis method of friction stir welding (FSW) aluminum alloy blank, a new theoretical model was proposed based on the new second order function constitutive model. The main idea is using the differences in mechanical property between the welding and heat affected zone substitution for the hypothesis of geometry groove in the classic M-K theoretical model. The new second order function constitutive model was applied to M-K theoretical model. Eventually, a new FLC theoretical model for FSW aluminum alloy blank was established. Such theoretical model also overcomes the low strain hardening exponent of aluminum alloy material, which leads to a poor regression accuracy by power-exponent function model. The forming limit test for FSW aluminum alloy blank was performed, and the real-time strain was measured by three-dimensional digital speckle strain measurement system (XJTUDIC). Finally, the results of experiments and the theoretical analysis are compared. Compared with the traditional power law, the regression result of the new second order function constitutive model on the stress-strain curve no matter in the initial yield stage or in late deformation stage has a good fitting precision. The maximum fitting error of the power law on the stress-strain curve is more than 12%, but the fitting error of the new second order function constitutive model is less than 1%. The theoretical prediction based on the new second order function constitutive model is significantly better than the theoretical predictions based on power law in predicting the forming limit of FSW aluminum alloy blank. The prediction error of the first principal strain based on the new second order function constitutive model is less than 0.01. While the maximum prediction error of the first principal strain based on the power law is 0.14.

The Forming Limits Prediction Model for Tailor Welded Blank with Straight Seam

Parameters Optimization of Tailor Welded Blank Forming Process

Study on Formability of Tailor Welded Blanks Based on Numerical Simulation

A Method for Prediction of Forming Strain for Cold Stamping Formed Head Made of S30408 Austenitic Stainless Steel

Simulation and prediction for welding deformation on welding procedure of hand pallet truck

Investigation on the Formability of Tailor-Welded Blanks

Numerical Simulation on Formability of Tailor-Welded Blank with Curved Weld-Line under Different Blank Holder Forces

Research on Formability of Tailor-welded Blanks with Different Thickness in Door Inner Stamping

Impact Modeling of the Weld Line of Tailor-Welded Blank

Weld-bead Migration and Formability of Tailor Welded Blank Based on Variable Blank Holding Force

Numerical Simulation and Experimental Study on the Weld-Line Movement of Tailor-Welded Blank

Sheet Metal Forming Limit Prediction Based on Plastic Deformation Energy

Drawing Process of Tailor Welded Blank Car Center Pillar Based on FEA

Investigation of Formability for Tailor-Welded Blank Box Based on Variable Blank-Holder Force over Stroke

Calculation of Free-Bend Load for Tailor Welded Blanks with Dissimilar Thickness

Forming Limit of FSW Aluminum Alloy Blank Based on a New Constitutive Model

Experimental Investigation on the Mechanical Properties of Weld Metal in Tailor Welded Blanks

New Forming Limit Prediction Criterion for Sheet Metals

Laser Weld-seam Modeling for Finite Element Analysis During Tailor-welded Tube Hydroforming

Numerical analysis of stress & strain and thickness variation in single point incremental forming of tailor welded steel blanks

The Theoretical Prediction and Numerical Simulation of Sheet Metal Forming Limit