Abstract:The numerical prediction of strain distribution in multi-gauge, aluminum alloy sheet tailor welded blanks (TWBs) is undertaken using the explicit dynamic finite element code LS-DYNA. The limiting dome height test (LDH) is modeled considering three gauge combinations: 2mm to 1mm, 2mm to 1.6mm and 1.6mm to 1mm and various weld line orientations relative to loading direction. Two welding techniques are considered: non-vacuum electron beam (NVEB) and dual beam Nd:YAG. Formability data is presented in terms of limiting dome height to failure measurements, as well as measured limit strains and indicates that the Nd:YAG process is superior to the NVEB process considered. In general, the model agrees with measured strain distributions relatively well, particularly in cases when weld failure dominates as in the NVEB welds. The model is overly conservative, however, for the higher performance Nd:YAG-welded blanks which generally fail in the thinner parent metal away from the fusion zone. The shell element-based model fails to capture through-thickness constraint effects near the weld and consequently localizes in the row of elements immediately adjacent to the weld line. On a entrepris la prédiction numérique de la distribution de contrainte d'échantillons soudés sur mesure de feuilles d'alliage d'aluminium de différentes épaisseurs, en utilisant le code explicite dynamique d'élément fini LS-DYNA. On a modélisé l'épreuve de la hauteur limitante du dôme en considérant trois combinaisons d'épaisseur, soit 2 mm à 1mm, 2 mm à 1.6 mm et 1.6 mm à 1 mm. On a considéré deux techniques de soudage: le faisceau électronique sans vide (NVEB) et le faisceau double Nd:YAG. En général, le modèle s'accorde relativement bien avec la distribution de déformation mesurée, particulièrement dans les cas où le lâchage de la soudure domine, tels que pour les soudures au NVEB. Cependant, le modèle est excessivement conservateur dans le cas des meilleures performances des échantillons soudés au Nd:YAG, lesquels lâchent généralement dans le métal-parent le plus mince, à l'écart de celui de fusion. Le modèle basé sur l'élément de l'enveloppe ne réussit pas à capturer les effets de contrainte à travers l'épaisseur près de la soudure et, conséquemment, les localise dans la rangée d'éléments immédiatement adjacents à la ligne de soudure‥

Prediction of Strain Distribution in Aluminum Tailor Welded Blanks for Different Welding Techniques

Numerical prediction of the limiting draw ratio for aluminum alloy sheet

Prediction of failure in bending of an aluminium sheet alloy

Numerical prediction and experimental validation of forming limit curves of laminated half-hard aluminum sheets

Residual Stress Tests and Predictive Model of Friction Stir Welded Normal-Strength Aluminium Alloy H-shaped Sections

Bending Limit Prediction of an Aluminum Thin Sheet

Modelling of welded aluminium connections in large-scale analyses

Numerical analysis of stress & strain and thickness variation in single point incremental forming of tailor welded steel blanks

In Situ Observations of the Strain Competition Phenomenon in Aluminum Alloy Resistance Spot Welding Joints during Lap Shear Testing

Experimental and numerical study on the tensile ductility of an aluminium alloy with heat-affected zones

Mechanical behaviour of longitudinal lap-welded joints of high strength steel: Experimental and numerical analysis

Numerical Simulation of the Stress-Strain State of a PAW-MIG-Welded 1561 Aluminum Alloy Butt Joint Produced Under Different Process Modes

Welding-induced stresses and distortion in high-strength steel T-joints: Numerical and experimental study

Welding Distortion Prediction In 5a06 Aluminum Alloy Complex Structure Via Inherent Strain Method

Physically-based constitutive modelling of residual stress development in welding of aluminium alloy 2024

Welding-induced Buckling Prediction for Large Thin-Walled Cylindrical Structures with Non-Uniform Stress Fields by Friction Stir Welding

The Interactive Effect of Microstructure and Stress State on the Microscopic Damage Development of Aluminum Alloy Tailor-Welded Blank

Prediction of Residual Stresses Within Dissimilar Al/steel Friction Stir Lap Welds Using an Eulerian-based Modeling Approach

Modeling material behavior of AA5083 aluminum alloy sheet using biaxial tensile tests and its application in numerical simulation of deep drawing

An experimental methodology to characterize load-based fracture models of third generation advanced high strength steel resistance spot welds

Predicting Sheet Forming Limit of Aluminum Alloys for Cold and Warm Forming by Developing a Ductile Failure Criterion