Abstract:The numerical prediction of strain distribution in multi-gauge, aluminum alloy sheet tailor welded blanks (TWBs) is undertaken using the explicit dynamic finite element code LS-DYNA. The limiting dome height test (LDH) is modeled considering three gauge combinations: 2mm to 1mm, 2mm to 1.6mm and 1.6mm to 1mm and various weld line orientations relative to loading direction. Two welding techniques are considered: non-vacuum electron beam (NVEB) and dual beam Nd:YAG. Formability data is presented in terms of limiting dome height to failure measurements, as well as measured limit strains and indicates that the Nd:YAG process is superior to the NVEB process considered. In general, the model agrees with measured strain distributions relatively well, particularly in cases when weld failure dominates as in the NVEB welds. The model is overly conservative, however, for the higher performance Nd:YAG-welded blanks which generally fail in the thinner parent metal away from the fusion zone. The shell element-based model fails to capture through-thickness constraint effects near the weld and consequently localizes in the row of elements immediately adjacent to the weld line. On a entrepris la prédiction numérique de la distribution de contrainte d'échantillons soudés sur mesure de feuilles d'alliage d'aluminium de différentes épaisseurs, en utilisant le code explicite dynamique d'élément fini LS-DYNA. On a modélisé l'épreuve de la hauteur limitante du dôme en considérant trois combinaisons d'épaisseur, soit 2 mm à 1mm, 2 mm à 1.6 mm et 1.6 mm à 1 mm. On a considéré deux techniques de soudage: le faisceau électronique sans vide (NVEB) et le faisceau double Nd:YAG. En général, le modèle s'accorde relativement bien avec la distribution de déformation mesurée, particulièrement dans les cas où le lâchage de la soudure domine, tels que pour les soudures au NVEB. Cependant, le modèle est excessivement conservateur dans le cas des meilleures performances des échantillons soudés au Nd:YAG, lesquels lâchent généralement dans le métal-parent le plus mince, à l'écart de celui de fusion. Le modèle basé sur l'élément de l'enveloppe ne réussit pas à capturer les effets de contrainte à travers l'épaisseur près de la soudure et, conséquemment, les localise dans la rangée d'éléments immédiatement adjacents à la ligne de soudure‥

Modelling of welded aluminium connections in large-scale analyses

Numerical modelling of lockbolted lap connections for aluminium alloy plates

Testing, Modelling and Design of Aluminium Alloy Single-Angle Members Connected by One Leg under Eccentric Compression

Experimental and numerical study on the tensile ductility of an aluminium alloy with heat-affected zones

Welding-induced stresses and distortion in high-strength steel T-joints: Numerical and experimental study

Research Of Weld On Axial Buckling Stress Of Multilayer Combined Cylindrical Shells

An Improved and Robust Finite Element Model for Simulation of Thin-Walled Steel Bolted Connections

Prediction of Strain Distribution in Aluminum Tailor Welded Blanks for Different Welding Techniques

Combined Calorimetry, Thermo-Mechanical Analysis and Tensile Test on Welded EN AW-6082 Joints

A review of welding simulation methods for large components

Static and dynamic testing and modelling of aluminium joints with flow-drill screw connections

Determination of Welding Stress and Distortion in Discontinuous Welding by Means of Numerical Simulation and Comparison with Experimental Measurements

An experimental methodology to characterize load-based fracture models of third generation advanced high strength steel resistance spot welds

Efficient finite element approach for modelling of actual welded structures

Tensile Behaviors and Mechanical Property Analyses of T-Welded Joint for Thin-Walled Parts in Consideration of Different TIG Welding Currents Using Multiple Damage Models and Fracture Criterions: Numerical Simulation and Experiment Validation

Mechanical Characteristic and Stress-Strain Modelling of Friction Stir Welded 6061-T6 Aluminium Alloy Butt Joints

Residual Stress Tests and Predictive Model of Friction Stir Welded Normal-Strength Aluminium Alloy H-shaped Sections

Mechanical behaviour of longitudinal lap-welded joints of high strength steel: Experimental and numerical analysis

IMPLEMENTATION OF LONGITUDINAL WELDING STRESSES INTO STRUCTURAL CALCULATION OF STEEL STRUCTURES

Numerical Simulation of Fatigue Crack Growth and Fracture in Welded Joints Using XFEM—A Review of Case Studies

Analysis of weld root fatigue cracking in load-carrying high-strength aluminum alloy cruciform joints