Abstract:The welding-induced residual stress is closely related to the mechanical properties of the welded joint, which can accelerate crack propagation and reduce the fatigue life of the welded joint. Therefore, a new composite heat source model based on the actual weld morphology was proposed to calculate the temperature field of high-strength steel single-pass full penetration laser welded joints. The solid-state phase transformation and precipitation hardening model were established based on the actual microstructure of welded joints for more accurately predict the residual stress. Four cases were designed to compare and analyze the influence mechanism of the interaction between solid-state phase transformation and precipitation hardening on the residual stress of welded joints. The solid-state phase transformation has a significant effect on the longitudinal and transverse stresses and stress evolution of welded joints. It increases the peak longitudinal compressive stress from –140.6 MPa to –755.1 MPa, with an increase of 529.52 %. Moreover, the longitudinal high stress gradient values generated at the junction of base metal and heat affected zone are as high as 860.9 MPa. Precipitation hardening behavior can weaken the peaks and high stress gradient values of transverse and longitudinal stresses. It can also make the longitudinal stress distribution of the fusion zone and the transverse stress distribution of the heat affected zone more homogeneous. In engineering applications, it was recommended that considering solid-state phase transformation in simulation calculation could accurately predict welding-induced residual stress without considering precipitation strengthening.

Prediction and Application of Welding Residual Deformation of Steel Sheets

Nonlinear Transient Analysis of Butt Welding Based on Finite Element Method

Numerical Prediction and Control of Deformation and Residual Stress in Double-Sided Arc Welding of Large Pressure Hull

Prediction of Double-Sided Arc Welding Deformation Based on Dynamic Heat Distribution Model and TEP-FE Approach

Simulation and prediction for welding deformation on welding procedure of hand pallet truck

Prediction of Residual Stress Distributions in Welded Sections of P92 Pipes with Small Diameter and Thick Wall Based on 3D Finite Element Simulation

Finite Element Prediction of Residual Stress and Deformation Induced by Double-Pass TIG Welding of Al 2219 Plate

Electromagnetic Ultrasonic Measurement for Welding Residual Stress Detection - Comparison Between Experiment with Numerical Simulation

Investigating Welding Distortion of Thin-Plate Stiffened Panel Steel Structures by Means of Thermal Elastic Plastic Finite Element Method

Finite element simulation of welding process and real-time monitoring assessment

Local Equivalent Welding Element to Predict the Welding Deformations of Plate-Type Structures

Predicting Welding Residual Stress of a Multi-pass P92 Steel Butt-Welded Joint with Consideration of Phase Transformation and Tempering Effect

Influence of Material Model on Prediction Accuracy of Welding Residual Stress in an Austenitic Stainless Steel Multi-pass Butt-Welded Joint

Residual Deformation Measurement of Laser Weldment Using the Laser Interferometry

Numerical simulation of residual stress and deformation on laser welding of "grooved-coat" structure

Analysis of Welding Heat Effect on Load-Carrying Behavior of I Section Steel Beam-Columns Strengthened by Welding

Investigation of Residual Stress in Butt-Welded Plates Considering Phase Transformation

Finite-element inverse analysis of residual stress for laser welding based on a contour method

Numerical and experimental study on thermal-metallurgical-mechanical behavior of high-strength steel welded joint

Welding Distortion Prediction and Mitigation in Thick Steel Plate Structures on Ships

Numerical computation methods of welding deformation and their application in bogie frame for high-speed trains