Abstract:A trailing ultrasonic-assisted laser welding (T-ULW) technology is first proposed to weld SUS301 stainless steel sheet with a thickness of 0.6 mm. Secondly, welding experiments with conventional laser welding and ultrasonic-assisted laser welding are carried out on SUS301 stainless steel thin sheet, and the weld morphologies are obtained. Thirdly, based the experimentally obtained cross section shape of the weld, a novel heat source model is proposed by means of polynomial fitting the actual weld contour. Fourthly, the welding temperature field, the welding deformation and residual stress are simulated, and the welding temperatures at some special points in the sample, the welding deformation and residual stress are measured. These experimental measurement results agree very well with the corresponding simulation results, which verify the proposed analysis approach based on the above novel heat source model is feasible and has high enough accuracy. Finally, the mechanism of how ultrasonic vibration affects the stress distribution in the samples welded by ultrasonic-assisted laser welding is discussed. Ultrasonic vibration affects the residual stress distribution of the weld mainly through two mechanisms. One is that ultrasonic vibration can speed up the flow of the molten material in the molten pool, and then make the temperature distribution there more uniformly and decrease the temperature gradient, and finally decrease the residual stress of the weld. The other one is that ultrasonic vibration can result in compression and plastic deformation, which finally increase to some extent the compressive stress of the weld near the ultrasonic vibration exerted.

Residual Deformation Measurement of Laser Weldment Using the Laser Interferometry

Residual strains of laser welding specimen by high temperature resistant gratings

Finite-element inverse analysis of residual stress for laser welding based on a contour method

Study on Joint Residual Stress Induced by Laser Beam Welding of High Strength Automobile Thin Sheet

Application of Moiré Interferometry to Study Residual Deformation in Lap-Welded Steel Plates

Numerical simulation of residual stress and deformation on laser welding of "grooved-coat" structure

Numerical Investigations on Residual Stress in Laser Penetration Welding Process of Ultrafine-Grained Steel

Mitigation of Tensile Residual Stress Induced During Welding with Laser Shock Processing

Numerical and experimental study of residual stress in multi-pass laser welded 5A06 alloy ultra-thick plate

Microstructural Inhomogeneity in the Fusion Zone of Laser Welds

Prediction and Application of Welding Residual Deformation of Steel Sheets

Simulation of temperature field and deformation in laser-arc hybrid additive manufacturing

Measurement and Simulation of Residual Stresses in Laser Welded CFRP/steel Lap Joints

In-situ strain measurement near weld pool using digital image correlation

Deformation analysis of laser processed grain oriented silicon steel sheet using moire interferometry

A novel pathway for multiscale high-resolution time-resolved residual stress evaluation of laser-welded Eurofer97

Numerical and experimental investigation into the evolution and distribution of residual stress in laser transmission welding of PC/Cu/PC

Effect of Process Conditions on Residual Stress in Laser-MAG Welding of High Strength Steel

Numerical Modelling and Experimental Verification of Thermal Characteristics and Their Correlations with Mechanical Properties of Double-Sided Laser Welded T-joint

Numerical simulation and experimental analysis on the deformation and residual stress in trailing ultrasonic vibration assisted laser welding

Redistribution of Residual Stress Field in the Weld Joint Due to Laser Shock Processing