Abstract:Weld solidification crack prevention in the laser penetration welding process is essential for the strength of the welded component. The formation of solidification cracks can ultimately be attributed to welding residual stresses, and preventive measures should be taken during welding. In this study, the effects of residual stresses on the laser penetration welding quality of ultrafine-grained steels were investigated. A heat source model was established through the analysis of the metallography of the cross section of the heat-affected zone (HAZ) of ultrafine-grained AN420s-grade steel, and the chemical composition of the weld bead was obtained using an FLS980-stm Edinburgh fluorescence spectrometer. Furthermore, the constitutive coupling relation between the temperature and material flow stress was established based on the Gibbs function, and the welding residual stress was obtained by setting trace points in a finite element analysis (FEA) model based on experimental data of the weld bead cross section under different welding conditions. The results show that weld solidification cracks will form when the residual stresses exceed the material flow stresses in the weld bead, and the residual stresses can be decreased through a reasonable increase of the welding speed. The results indicate that the proposed criterion has high accuracy and can be used to predict the formation of weld solidification cracks in the laser penetration welding process.

Redistribution of Residual Stress Field in the Weld Joint Due to Laser Shock Processing

Prediction and Characterization of Plastic Damage in a Weld Joint Resulting from Laser Shock Processing

Mitigation of Tensile Residual Stress Induced During Welding with Laser Shock Processing

Residual Stress Field Induced by Laser Peening: a Finite Element Analysis

Investigation of Ductile Damage Induced by Laser Shock Processing on a 35CD4 Steel

Study on numerical simulation of residual stresses induced by laser shock processing

Simulation of the elasto-plastic response and residual stresses near metal surface due to laser shock processing

Study on Residual Stress of Laser Shock Processing Based on Numerical Simulation and Orthogonal Experimental Design

Simulation And Experimental Study On Residual Stress Distribution In Titanium Alloy Treated By Laser Shock Peening With Flat-Top And Gaussian Laser Beams

Optimization Of Residual Stresses Induced By Multiple Laser Shock Processing

Numerical Simulation of Residual Stress Field for Laser Shock Processing

Numerical modeling of residual stress induced by laser shock processing

Numerical Investigations on Residual Stress in Laser Penetration Welding Process of Ultrafine-Grained Steel

3-D FEM simulation of laser shock processing

Stepwise varying of laser parameters to enhance the residual stress field in multiple laser shock processing: numerical verification of single-point region

Laser Shock Processing of Metal Sheet and Welded Joints

The Effect of Viscous Drag on the Maximum Residual Stresses Achievable in High-Yield-Strength Materials in Laser Shock Processing

Fem Simulation of Residual Stresses Induced by Laser Shock with Overlapping Laser Spots

Effects of Laser Shock Processing on Morphologies and Mechanical Properties of ANSI 304 Stainless Steel Weldments Subjected to Cavitation Erosion

Investigation on the non-homogeneity of residual stress field induced by laser shock peening

An Analytical Model To Predict Residual Stress Field Induced By Laser Shock Peening