Abstract:Abstract Laser shock peening (LSP) is investigated for its use in altering the electrochemical and wetting behavior of 316L stainless steel made with laser powder bed fusion (LPBF). The corrosion performance of LPBF stainless steel varies between studies and build parameters, thus motivating the search for postprocessing methods that enable wetted surface applications. Compressive surface stress has been demonstrated to reduce corrosion rate in additively manufactured metal and LSP is known to impart compressive residual stress into metal targets. Wettability also affects corrosion behavior and LSP induces hydrophobicity. LSP is therefore a promising tool for improving corrosion behavior of LPBF stainless steel. This paper examines the electrochemical properties of LPBF stainless steel before and after LSP with electrochemical impedance spectroscopy and potentiokinetic measurements. Contact angle, surface free energy, and surface finish are studied with dynamic contact angle measurements and profilometry. X-ray diffraction and energy-dispersive X-ray spectroscopy measures residual stress and surface chemistry. The top surface perpendicular to the build direction (XY) and the wall surface parallel with the build direction (XZ) are studied for all measurements due to the large differences in roughness and mechanical properties between these surfaces. LSP increases pitting potential for both XY and XZ surfaces and causes an increase to the surface electrochemical impedance. LSP also increases the contact angle of liquids on both surfaces. These changes to electrochemistry and wettability are attributed in part to surface morphology and surface chemistry alterations as well as the inducement of compressive residual stress.

Residual Stress Field Induced by Laser Peening: a Finite Element Analysis

Influence of laser parameters on residual stress field of AISI 304 stainless steel induced by laser peening: A finite element analysis

Influence of Laser Peening Parameters on Residual Stress Field of 304 Stainless Steel

Optimization Of Residual Stresses Induced By Multiple Laser Shock Processing

Residual Stress Distribution and Microstructure at a Laser Spot of AISI 304 Stainless Steel Subjected to Different Laser Shock Peening Impacts

Study on numerical simulation of residual stresses induced by laser shock processing

Simulation of the elasto-plastic response and residual stresses near metal surface due to laser shock processing

Mitigation of Tensile Residual Stress Induced During Welding with Laser Shock Processing

An Analytical Model To Predict Residual Stress Field Induced By Laser Shock Peening

Numerical Simulation of Residual Stress Field for Laser Shock Processing

Experimental and numerical investigation on residual stress of 316L SS treated by different laser shock peening parameters

Study on Residual Stress of Laser Shock Processing Based on Numerical Simulation and Orthogonal Experimental Design

Dynamic Response and Residual Stress Fields of Ti6al4v Alloy under Shock Wave Induced by Laser Shock Peening

Redistribution of Residual Stress Field in the Weld Joint Due to Laser Shock Processing

Effects of surface curvature on residual stress field of 316L stainless steel subjected to laser shock peening

A Comprehensive Review on Finite Element Analysis of Laser Shock Peening

The effects of laser peening on laser additive manufactured 316L steel

Effects of Laser Shock Processing on Morphologies and Mechanical Properties of ANSI 304 Stainless Steel Weldments Subjected to Cavitation Erosion

Effect of Laser Shock Peening on Electrochemistry and Wettability of Additively Manufactured Stainless Steel

Unraveling Residual Stress Distribution Characteristics of 6061-T6 Aluminum Alloy Induced by Laser Shock Peening

Stepwise varying of laser parameters to enhance the residual stress field in multiple laser shock processing: numerical verification of single-point region