Abstract:Abstract Residual stress (RS) is a major processing issue for selective laser melting (SLM) of metal alloys. Postprocessing by way of heat treatment or hot isostatic pressing is usually required for acceptable mechanical properties. In this work, laser shock peening (LSP) treatment on both SLM and cast aluminum A357 alloys are compared with regard to the development of beneficial near-surface compressive RS. Experiments are conducted using high energy nanosecond pulsed laser, together with a fast photodetector connected to a high-resolution oscilloscope and high-speed camera to identify detailed temporal and spatial laser pulse profiles to improve numerical predictions. Constitutive modeling for SLM A357 alloy is performed using finite element simulation and data obtained from X-ray diffraction (XRD) measurements. Since XRD-RS measurements are accompanied with significant machine-reported error, an effective method is introduced to quantify the material constitutive model uncertainty in terms of a joint probability mass function. Conventionally, most constitutive behavior research for LSP involves deterministic material modeling. Predicted RS using deterministic approaches fail to reflect real-world variations in the materials, laser treatment, or RS measurements. A discretized Bayesian inference is used to quantify the rate-dependent plasticity material model parameters as a joint probability function. RS are then characterized as random fields, which provides far greater insight into the practical ability to attain desired residual stresses. Moreover, for identical LSP treatments, it is determined that the material models are significantly different for the SLM and the conventional cast A357 aluminum alloys, resulting in much lower magnitude of compressive RS in the SLM alloy.

Numerical modeling of residual stress induced by laser shock processing

Study on numerical simulation of residual stresses induced by laser shock processing

Residual Stress Field Induced by Laser Peening: a Finite Element Analysis

Mitigation of Tensile Residual Stress Induced During Welding with Laser Shock Processing

Multi-objective optimization of laser shock peening based on an analytical model

Optimization Of Residual Stresses Induced By Multiple Laser Shock Processing

Redistribution of Residual Stress Field in the Weld Joint Due to Laser Shock Processing

Numerical Investigation of Residual Stress Field Induced by Array-Type Laser Shock Peening

Stepwise varying of laser parameters to enhance the residual stress field in multiple laser shock processing: numerical verification of single-point region

Experimental and numerical investigation on residual stress of 316L SS treated by different laser shock peening parameters

Numerical Simulation Research on Laser Shock Forming of Thin Metal Sheet

Numerical investigation on spall fracture in a metallic material caused by laser shock peening

Numerical Simulation Research on Laser Shock Forming

The Effect of Viscous Drag on the Maximum Residual Stresses Achievable in High-Yield-Strength Materials in Laser Shock Processing

Stress sensitivity analysis of laser quenching based on regression model

A Simulation Study on the Effect of Residual Stress on the Multi-Layer Selective Laser Melting Processes Considering Solid-State Phase Transformation

Prediction of Residual Stress Random Fields for Selective Laser Melted A357 Aluminum Alloy Subjected to Laser Shock Peening

Study of residual stress in selective laser melting of Ti6Al4V

Investigating the applicability of the layered average eigenstrain method in laser shock peening

Analytical Modeling of Residual Stress in Laser Powder Bed Fusion Considering Part’s Boundary Condition

Effects of surface curvature on residual stress field of 316L stainless steel subjected to laser shock peening