Abstract:Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Ahead of Print. Localised heat input, as it occurs in welding with moving heat sources, induces residual stresses and distortion in materials. The quantitative determination of residual stress evolution is difficult. Despite existing models, residual stress build-up with temperature progression is not fully understood. High-flux density X-rays from a synchrotron source allow the measurement of local strains in materials and improve the resolution of stress gradients as it permits small measurement volumes (Gibmeier et al., 2014). A laser beam welding process was used to perform linear bead-on-plate welds on bar steel samples. The X-ray diffraction system recorded the transient strain evolution. Multiple repetitions at different locations in the specimen were combined to develop a map of the strains present within the specimen. The temperature was measured locally at the surface of the sample. As the strain was determined within a measurement volume inside the sample, the temperature history over time had to be obtained as well. A numerical model was employed to determine the temperature inside the measurement volume. This model was calibrated using the transient surface temperatures and metallographic cross-sections. The result was a representation of the local strain superimposed on the temperature distribution. Analysis of this data correlation showed that a strain maximum occurs as a function of time and distance from the heat source, which is likely to coincide with the austenite-ferrite phase transformation temperature.

A novel pathway for multiscale high-resolution time-resolved residual stress evaluation of laser-welded Eurofer97

Estimation of Residual Stresses by Nanoindentation in an Experimental High Strength Microalloyed Steel Subjected to Rapid Thermal Cycles

Neutron Bragg edge tomography characterisation of residual strain in a laser-welded Eurofer97 joint

Assessing the Residual Stresses in Dissimilar Welded Joint: Depth-Sensing Indentation Testing and Numerical Simulation

ICONE19-43939 Phenomenological Evaluation of Laser-Irradiated Welding Processes with a Combined Use of Higher-Accuracy Experiments and Computational Science Methodologies : (5) Numerical Simulation of the Welding Processes with a Multi-Dimensional Multi-Physics Analysis Code SPLICE

Micrometre Scale Residual Stress Measurement in Fusion Boundary of Dissimilar Steel Welded Joints Using Nanoindenter System

Numerical Investigations on Residual Stress in Laser Penetration Welding Process of Ultrafine-Grained Steel

In Situ Analysis of Stress and Microstructure Evolution during Welding of High-Alloy Steels Using Energy-Dispersive X-Ray Diffraction

Microhardness and Tensile Strength Analysis of SS316L/CuCrZr Interface by Laser Powder Bed Fusion

Development of microstructure and residual stress in electron beam welds in low alloy pressure vessel steels

Numerical and experimental investigation into the evolution and distribution of residual stress in laser transmission welding of PC/Cu/PC

Full-Field Eigenstrain Reconstruction For The Investigation Of Residual Stresses In Finite Length Weldments

Numerical and experimental study of residual stress in multi-pass laser welded 5A06 alloy ultra-thick plate

Residual stress of typical parts in laser powder bed fusion

Residual Notch Stress Intensity Factor assessment via 3D welding numerical simulation: influence of power input

Synchrotron EDXRD strain-temperature measurement during laser welding

Mitigation of Tensile Residual Stress Induced During Welding with Laser Shock Processing

Residual Deformation Measurement of Laser Weldment Using the Laser Interferometry

Stress waves in laser-material interaction: From atomistic understanding to nanoscale characterization

Strain incompatibility as a source of residual stress in welding and additive manufacturing

Auxiliary Beam Stress Improved Laser Welding for Repair of Irradiated Light Water Reactor Components