Abstract:Accurate prediction of welding residual stresses is often challenging due to the complexity of the welding process which includes moving heat source, temperature-dependent material properties etc. Over the past two decades or so, the numerical simulation technologies have been widely used in the welding process and a number of numerical models have been proposed to predict temperature field and residual stresses field induce by welding process. In the previous numerical simulations, the weldment was either in Free State or rigidly constrained. Such manipulations can not reflect the realistic constraint conditions of the weldment. In this simulation, clamps and backing board are all included in the model as elastic body and analytical rigid body, respectively. In the thermal analysis, the thermolysis of clamps and backing board can be equivalent to forced convection heat transfer, where the coefficients of forced convection heat transfer are temperature dependent; in the mechanical analysis, both the contact interaction between clamps and weldment and the contact interaction between backing board and weldment are considered, normal and tangent contact interaction properties are assumed as "HARD" contact and Coulomb friction, respectively. After welding process, residual compressive plastic strains existing in the weld zone and HAZ are the sources of residual stresses. Post welding cold rolling is an effective and convenient method to reduce residual compressive plastic strains induces by welding especially for thin-walled structure. In the previous researches, either welding process and cold rolling process were treated as two separate processes or only the residual stresses induced by welding process was considered as initial condition in the cold rolling process. In this simulation, welding residual stresses, plastic strains and deformations are all imported as the initial state of the cold rolling process to increase the accuracy of the numerical simulation. The import of plastic strains will affect the accuracy of the numerical simulation for the material which has obvious work harden effect.

Simulation and prediction for welding deformation on welding procedure of hand pallet truck

Prediction of Double-Sided Arc Welding Deformation Based on Dynamic Heat Distribution Model and TEP-FE Approach

Numerical Prediction and Control of Deformation and Residual Stress in Double-Sided Arc Welding of Large Pressure Hull

Numerical computation methods of welding deformation and their application in bogie frame for high-speed trains

Research on welding deformation for box girder of bridge crane based on thermal elasto-plastic theory

Study on FEM Numerical Simulation Method for the Welding Distortion

Prediction of Welding Deformation of Automotive Components Using Large-scale Thermal Elastic Plastic Analysis

Prediction and Application of Welding Residual Deformation of Steel Sheets

Intelligent optimization of non-rigidly supported stationary shoulder friction stir welding parameters

Numerical simulation and analysis of welding of drive axle housing and axle tube

Investigating Welding Distortion of Thin-Plate Stiffened Panel Steel Structures by Means of Thermal Elastic Plastic Finite Element Method

Prediction of temperature and residual stress distributions in friction stir welding of aluminum alloy

Welding Distortion Prediction and Mitigation in Thick Steel Plate Structures on Ships

High precision modeling of welding and post welding cold rolling continuous process in numerical simulation

Prediction of distortion in a thin-plate structure with intermittent fillet joints using a local-to-global approach

Numerical simulation and welding parameters optimization for minimum deformation of AHSS based on RSM & QGA

ESTABLISHMENT OF MOVING TEMPERATURE FUNCTION METHOD AND ITS APPLICATION ON WELDING DISTORTION PREDICTION OF CYLINDRICAL AND CONICAL ALUMINUM ALLOY STRUCTURES

Finite Element Prediction of Residual Stress and Deformation Induced by Double-Pass TIG Welding of Al 2219 Plate

Influence of Material Model on Prediction Accuracy of Welding Residual Stress in an Austenitic Stainless Steel Multi-pass Butt-Welded Joint

Making an Approaehing to Deformation of T-structure of Bridge Cranes in Assembling and Welding

An algorithm for prediction of bending deformation induced by multi-seam welding of a steel-pipe structure