Abstract:A coupled thermo-metallo-mechanical model is proposed to analyse the temperature, stress and microstructure fields in multi-pass welding of P92 pipes. An axisymmetric model is adopted to increase the efficiency of the simulation. To preserve the temperature field from a three-dimensional (3D) analysis, a procedure is proposed to convert the 3D result into a two-dimensional (2D) form, which is compared to temperature fields created by other 2D heat transfer analyses. A metallurgical algorithm, which does not need the calibration with metallurgical experiments, is implemented in the finite element (FE) analysis to predict spatial distributions of product phases during multi-pass welding. Comparison between the predictions and the metallurgical graphs is made to verify the effectiveness of the metallurgical analysis after twenty thermal cycles. Hardness test is also employed to characterize the microstructure and to validate the metallurgical predictions. Five temperature fields, one created from the newly proposed approach and four from existent ones, are used as external loads to conduct the mechanical analysis. The volumetric change due to the phase transformation is considered as an extra volumetric strain, which is implemented by user subroutine. The stress distributions predicted using the five temperature fields are plotted together with the 3D stress result to examine the effectiveness of the developed procedure. The stress at the external surface of the pipe is measured by the X-ray diffraction technique, and is further compared to the stress predictions. The advantage of the model is demonstrated by comparing the computational time consumed in the mechanical analysis.

Nonlinear Transient Analysis of Butt Welding Based on Finite Element Method

Numerical Simulation of Temperature and Residual Stress Fields in Thick Plate EBM Welding

Finite element simulation of welding process and real-time monitoring assessment

Simulation and Analysis on Longitudinal TIG Welding of TC4 Titanium Alloy Thin-walled Circular Tube

Three-dimensional finite element analysis on welding residual stresses of construction steel

Thermal, metallurgical and mechanical analysis of circumferentially multi-pass welded P92 steel pipes

Nonlinear Numerical Simulation of Welding Heat-Cycle and Its Application in Welding Heat Simulation

Numerical Simulation of Welding Deformation for Hull Superstructure Steel Based on the Finite Element Analysis

Finite Element Analysis of Transient Welding Stress and Strain During Ti-6al-4v Thin Plate Welding with Impact Rotation

Finite Element Simulation for Residual Stresses in Weling Process

Sensitivity Analysis of Some High Efficiency Computational Methods for Welding Process Numerical Simulation

Finite Element Analysis of Temperature Field, Microstructure and Residual Stress in Multi-Pass Butt-Welded 2.25cr–1mo Steel Pipes

3D finite element simulation on stress-strain distributions in all position root butt welding of pip

Finite element simulation of temperature field for TIG butt welding of thin plate

Investigation of Residual Stress in Butt-Welded Plates Considering Phase Transformation

Thermal-mechano-metallurgical coupled analysis of welding residual stress

Finite Element Analysis of Residual Stress in 2.25Cr-1Mo Steel Pipe During Welding and Heat Treatment Process

Numerical simulation of the laser welding process in butt-joint specimens

Numerical Simulation of Welding Stresses and Distortions Based on 3D Dynamic Substructure Method

Numerical simulation of welding deformation in weld on thin low carbon steel plate

Finite Element Analysis of Modeling Residual Stress Distribution in All-position Duplex Stainless Steel Welded Pipe