Numerical Simulation for Full-Penetration Electron Beam Welding of Ti2AlNb Alloy

Li,Yanjun,Zhao,Yue,Wu,Aiping,Zhu,Ruican,Wang,Guoqing

2017-01-01

Rare Metal Materials and Engineering

Abstract:A 3D thermal elastic-plastic finite element model was developed to predict welding residual stresses induced by full-penetration electron beam welding of Ti2AlNb alloy. Rotary-Gauss body heat source model was modified to reflect the full-penetration weld. The results show that the cross section profiles of the weld seam simulated with the modified heat source model agree well with the experimental results. The residual stress distribution also has a good agreement between the numerical and experimental results, which proves the validity of the finite element model. The longitudinal tensile stresses plays a major role in the welded joint of Ti2AlNb alloy and the region of residual stresses distribution is very narrow within a distance 3 mm away from the weld centerline. Compressive transverse stress is observed on the top and bottom surfaces while tensile transverse stress at the center of the weld, and the discrepancy is ascribed to the longitudinal and normal contracting of the weld. In addition, the phenomenon of local three dimensions residual tensile stresses appears in the plate center.