Abstract:Alloy 2060, a new generation of aluminum–lithium (Al-Li) alloy, is widely used for aviation structural parts due to its high-specific strength and high-specific stiffness. However, poor formability of Al-Li alloy is commonly exhibited at room temperature. In this paper, the formability of Al-Li alloy 2060 was studied under the conditions of elevated temperatures. The Marciniak–Kuczynski (M–K) model was developed to effectively predict the forming limit curves (FLCs) under hot stamping conditions. Firstly, the hot tensile test was conducted to investigate the high-temperature deformation behaviors, and the Fields–Backofen equation was calibrated to represent the flow stress of the alloy. Then, the isothermal hemispherical punch tests were proposed to obtain the FLCs of Al-Li alloy 2060. Finally, the FLC predicted by the M–K model was input into the deep drawing finite element simulation model to verify the accuracy of the prediction results and predict the possible fracture of the hot stamping parts. The cup-shaped deep drawing test and the thin-walled shell part hot stamping test were carried out to verify the accuracy of the FLCs and the formability of the Al-Li alloy 2060. The results show that the true stress increases with the strain rate increasing and decreases with the temperature increasing. The established M–K model can accurately predict the FLCs of alloy 2060. It is also found that the initial thickness imperfection factor f0 is an important parameter that determines the change of FLC. Comparing the experimental and simulation results, it is concluded that the established M–K model would be adaptable in the FE simulation to estimate if the fracture of parts occurs. The simulation model considered the FLC can predict the fracture, thinning, and wrinkle of the parts. The stamping depth increases with the deformation temperature increasing and the blank holder force decreasing.

A Method for Prediction of Forming Strain for Cold Stamping Formed Head Made of S30408 Austenitic Stainless Steel

Research on Prediction Method of Plastic Deformation for Cold Stamping Formed Standard Elliptical Head Made of Austenitic Stainless Steel

Theoretical Prediction of High Strength Steel 22mnb5 Forming Limit in High Temperature Based on M-K Model

RESEARCH ON FORMING TEMPERATURE OF METASTABLE AUSTENITIC STAINLESS STEEL HEAD BASED ON STRAIN-INDUCED MARTENSITIC TRANSFORMATION

Prediction on Die Structure Performance During Advanced High-Strength Steel Sheet Metal Stamping with Non-Rigid Tooling Definition

Prediction of Strain Path Changing Effect on Forming Limits of AA 6111-T4 Based on a Shear Ductile Fracture Criterion

ANFIS-based forming limit prediction of stainless steel 316 sheet metals

Model for predicting ductile fracture of SA508-3 steel undergoing hot forming

Defect Prediction and Control for Ultra-high-strength Steel Complex Structure in Hot Forming Based on FEM

Formability Prediction for Thermal Stamping of Magnesium Alloy Sheet Based on M-K Model

A Thermal Forming Limit Prediction Method Considering Material Damage for 22mnb5 Sheet

M–K model based forming limit prediction of aluminum–lithium alloy 2060 and its application in hot stamping

Numerical Prediction of Microstructure and Mechanical Properties During the Hot Stamping Process

Sheet Metal Forming Limit Prediction Based on Plastic Deformation Energy

M–K Ductile Damage Theory Predicts Formability of Stainless Steel Ultra-Thin Strips in Stamping

Research progress of the prediction method for thermal formability of high strength steel

Evaluation of Limit Strain and Temperature History in Hot Stamping of Advanced High Strength Steels (AHSS)

Prediction of the Volume Fraction of Retained Austenite in Sheet Metal Forming for Trip Steels

Predictions of the Mechanical Properties and Microstructure Evolution of High Strength Steel in Hot Stamping

Analysis of Forming Limits Based on a New Ductile Damage Criterion in St14 Steel Sheets

Prediction of Forming Limit for Aluminum Alloy Sheet Coupling with Temperature and Strain Rate